Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

Numerical simulations on the flow regime characteristics of horizontal pneumatic conveying using CFD-DEM

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Flow Regime Identification in Horizontal Pneumatic Conveying by Nonintrusive Acoustic Emission Detection

Numerical Simulation on Gas-Solid Two-Phase Flow in Horizontal Pneumatic Conveying Pipe Based on DPM Model

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Analysis of gas-solid flow characteristics in intricate pipelines

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

Numerical simulation of dense-phase pneumatic conveying in vertical pipe for gasifier

CFD-DEM modelling and simulation of pneumatic conveying: A review

Modeling and analysis of flow regimes in hydraulic conveying of coarse particles

CFD-DEM Modelling of Hydraulic Conveying of Solid Particles in a Vertical Pipe

Study on the flow characteristics of gas-solid two-phase flow in a horizontal-vertical pneumatic conveying system based on dunes

Eulerian-Lagrangian simulation of hydrodynamics of gas-solid flows in downer

Effect of drill pipe rotation on gas-solid flow characteristics of negative pressure pneumatic conveying using CFD-DEM simulation

Study on flow characteristics of vertical pneumatic conveying of stiff shotcrete materials based on CFD-DEM

Numerical Simulation of the Gas-Solid Flow Around the Valve of Pneumatic Conveying System

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Experimental and Numerical Study of a Horizontal-Vertical Gas-Solid Two-Phase System with Self-Excited Oscillatory Flow

Numerical modelling of suction filling using DEM/CFD

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Research on the Pneumatic Conveying Characteristics of Fly Ash in the Power Station