Abstract:Deposition of granular materials into a container is a general industrial packing process. In this study, the deposition behaviour of dilute granular mixtures consisting of two types of particles that were of the same particle size but different particle densities in the presence of air was numerically analyzed using a coupled discrete element method (DEM) and computational fluid dynamics (CFD). Bilayer granular mixtures with light particles at bottom and heavy particles at top were first simulated. It was found that the presence of air significantly affected the flow behaviour of the bilayer mixtures. For the system with a relatively low initial void fraction, the air entrapped inside the container escaped through the dilated zones induced due to the friction between the powder bed and wall surfaces. The escaping air streams entrained light particles that were originally located at the bottom of the granular system. Consequently, these light particles were migrated to the top of the granular bed at the end of deposition process. More light particles were migrated when the deposition distance was increased. For the system with a high initial void fraction, some light particles penetrated into the top layer of heavy particles and created a mixing zone. Deposition of random mixtures with different initial void fractions was also investigated and the influence of initial void fraction on the segregation behaviour was explored as well. It was found that the increase of void fraction promoted segregation during the deposition in air. It was demonstrated that, for granular mixtures consisting of particles of different air sensitivities, the presence of air had a significant impact on the mixing and segregation behaviour during the deposition.

Modeling and analysis of flow regimes in hydraulic conveying of coarse particles

CFD-DEM Modelling of Hydraulic Conveying of Solid Particles in a Vertical Pipe

Progress in Model for Particle Flow

Multi-Scale Study of Particle Flow in Silos

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Numerical simulations on the flow regime characteristics of horizontal pneumatic conveying using CFD-DEM

CFD-DEM modelling and simulation of pneumatic conveying: A review

Study of the hydraulic transport of non-spherical particles in a pipeline based on the CFD-DEM

Validation of a Eulerian-Lagrangian numerical algorithm for simulating ultra-coarse particles transported in horizontal and vertical hydraulic pipes

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Kinematic Waves and Collision Effects in Dense Fluid–particle Flow During Hydraulic Conveying

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

CFD-DEM analysis of hydraulic conveying of non-spherical particles through a vertical-bend-horizontal pipeline

Experimental investigation of the motion states of coarse particles with sediment-laden flow in a horizontal pipe

Research on the Motion of Cylindrical Particles in the Pneumatic Conveying System

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

Flow regimes and characteristics of dense particulate flows with coarse particles in inclined pipe

Linear stability and numerical analysis of vertical dense particulate flows in hydraulic conveying