Abstract:The higher voltage blocking capability and faster switching speed of silicon-carbide (SiC) mosfets have the potential to replace Si insulated gate bipolar transistors (IGBTs) in medium-low-voltage and high-power applications. In this paper, a state-of-the-art commercially available 325 A, 1700 V SiC mosfet module has been fully characterized under various load currents, bus voltages, and gate resistors to reveal their switching capability. Meanwhile, Si IGBT modules with similar power ratings are also tested under the same conditions. From the test results, several interesting points have been obtained: different to the Si IGBT module, the over-shoot current of the SiC mosfet module increases linearly with the increase of the load current and it has been explained by a model of the over-shoot current proposed in this paper; the induced negative gate voltage due to the complementary device turn-off (crosstalk effect) is more harmful to the SiC mosfet module than the induced positive gate voltage during turn-on when the gate off-voltage is 6 V; the maximum dvdt and didt (electromagnetic interference) during switching transients of the SiC mosfet module are close to those of the Si IGBT module when the gate resistance is larger than 8 but the switching loss of the SiC mosfet module is much smaller; the switching losses of the Si IGBT module are greater than those of the SiC mosfet module even when the gate resistance of the former is reduced to zero. An accurate power loss model, which is suitable for a three-phase two-level converter based on SiC mosfet modules considering the power loss of the parasitic capacitance, has been presented and verified in this paper. From the model, a 96.2 efficiency can be achieved at the switching frequency of 80kHz and the power of 100 kW.

Theoretical Analysis of ON-State Performance Limit of 4H-SiC IGBT in Field-Stop Technology

Theoretical Performance Limit of the IGBT

A comprehensive analysis of breakdown mechanisms in 4H-SiC MOSFET and JFET

Breaking the Theoretical Limit of SiC Unipolar Power Device - a Simulation Study

Design and Characterization of High-Voltage 4H-Sic P-Igbts

Performance Evaluation of High-Power SiC MOSFET Modules in Comparison to Si IGBT Modules

Optimum design of 1.4 kV trench IGBTs-the next generation of high power switching devices

Enhanced Conduction Characteristics in SiC IGBT with Floating P-Grid Shielded Thick Current Storage Layer

Exploring SiC Planar IGBTs Towards Enhanced Conductivity Modulation Comparable to SiC Trench IGBTs

Optimum Design of 1.4kv Non-Punch-Through Trench Igbts: the Next Generation of High-Power Switching Devices

An Experimental And Numerical Investigation Of Igbt Blocking Characteristics

A Novel 4H–SiC/Si Heterojunction IGBT Achieving Low Turn–Off Loss

Cell Design Consideration in SiC Planar IGBT and Proposal of New SiC IGBT with Improved Performance Trade-Off

A novel 4H-SiC IGBT structure with improved trade-off between short circuit capability and on-state voltage drop

A New SiC Planar-Gate IGBT for Injection Enhancement Effect and Low Oxide Field

A Hybrid-Channel Injection Enhanced Modulation 4H-SiC IGBT Transistors With Improved Performance

Performance limits of high voltage press-pack SiC IGBT and SiC MOSFET devices

Pulsed Overcurrent Capability of Power Semiconductor Devices in Solid-State Circuit Breakers: SiC MOSFET Vs. Si IGBT

Design and Characterization of 10 kV High Voltage 4H-SiC p-Channel IGBTs with Low VF

Comparing SiC Switching Power Devices: MOSFET, NPN Transistor and GTO Thyristor