Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

Thermal performance of nano-enhanced phase change material and air-based lithium-ion battery thermal management system: An experimental investigation

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Experimental investigations of a novel phase change material and nano enhanced phase change material based passive battery thermal management system for Li-ion battery discharged at a high C rate

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Study on thermal aspects of lithium-ion battery packs with phase change material and air cooling system

Thermal management of lithium-ion battery module using the phase change material

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

Experimental Analysis on the Thermal Management of Lithium-Ion Batteries Based on Phase Change Materials

Preparation of thermally conductive composite phase change materials and its application in lithium-ion batteries thermal management

Numerical Investigation of the Thermal Performance of a Hybrid Phase Change Material and Forced Air Cooling System for a Three-Cell Lithium-Ion Battery Module

A novel battery thermal management system using nano-enhanced phase change materials

Thermal performance of a hybrid thermal management system that couples PCM/copper foam composite with air-jet and liquid cooling

Challenges in thermal management of lithium-ion batteries using phase change nanocomposite materials: A review

Numerical investigation on thermal management system for lithium ion battery using phase change material

Battery Thermal Management Using Phase Change Material-Metal Foam Composite Materials at Various Environmental Temperatures

Advances in the improvement of thermal-conductivity of phase change material-based lithium-ion battery thermal management systems: An updated review

Numerical investigation on integrated thermal management for a lithium-ion battery module with a composite phase change material and liquid cooling

Incorporating Copper and Carbon Nanotube Nanoparticles into Phase Change Materials for Enhanced Thermal Management in Batteries

Fin structure and liquid cooling to enhance heat transfer of composite phase change materials in battery thermal management system

Experimental and numerical investigation of nanoparticle assisted PCM-based battery thermal management system

Design and thermal analysis of Fin-PCM-integrated thermal management system for lithium-ion cylindrical battery pack