Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

Design and thermal analysis of Fin-PCM-integrated thermal management system for lithium-ion cylindrical battery pack

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Enhancing thermal management in cylindrical Li-ion battery through PCM integration with variable contact area

Enhancing Thermal Performance and Cooling Solutions of Phase Change Material in Battery Thermal Management System: A Computational Analysis

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

Hybrid battery thermal management by coupling fin intensified phase change material with air cooling

Experimental and Numerical Investigations of a Thermal Management System Using Phase-Change Materials and Forced-Air Cooling for High-Power Li-Ion Battery Packs

Numerical analysis on the thermal management of phase change material with fins for lithium-ion batteries

Optimization of the Internal Fin in a Phase-Change-material Module for Battery Thermal Management

Numerical investigation on thermal management system for lithium ion battery using phase change material

Numerical analysis of lithium-ion battery thermal management system using phase change material assisted by liquid cooling method

Evaluation of Fin Intensified Phase Change Material Systems for Thermal Management of Li-ion Battery Modules

Study on thermal aspects of lithium-ion battery packs with phase change material and air cooling system

Computational study on hybrid air-PCM cooling inside lithium-ion battery packs with varying number of cells

Thermal Management of the Lithium-Ion Battery by the Composite PCM-Fin Structures

A novel thermal management system combining phase change material with wavy cold plate for lithium-ion battery pack under high ambient temperature and rapid discharging

Numerical analysis of different fin structures in phase change material module for battery thermal management system and its optimization

Numerical study on hybrid battery thermal management system integrating water, phase change material, and fins, under New European Driving Cycle

Study of Natural Convection of Lithium-Ion Battery Module Employing Phase Change Material

Improved Thermal Management of Li-Ion Batteries with Phase-Change Materials and Metal Fins