Abstract:Cycle life of lithium-ion batteries (LIBs) is essential for the application of hybrid electric vehicles (HEV) and electric vehicles (EV). Since temperature greatly affects degradation rate and safety of LIBs, battery thermal management system (BTMS) is required. In this paper, the performance of active air cooling and passive phase change material (PCM) cooling for BTMS are assessed in terms of battery thermal states and cycle life. A coupled one-dimensional electrochemical and two-dimensional thermal models are developed to simulate the temperature of a battery module with 16 cylindrical (26650) graphite-LiFePO4 lithium-ion battery cells. The model is validated with the experimental data taken from literature. By applying a realistic current profile of a HEV to the battery model, simulations are performed at various ambient temperatures, inlet velocities of air cooling and PCM phase change temperatures. The battery cycle life and its non-uniformity across the module are estimated with a battery degradation model with inputs of battery temperature results. The study shows that active air cooling has a better cooling effect than PCM cooling, especially at high ambient temperatures. But the active air cooling leads to a large temperature non-uniformity at low inlet air velocities. The cycle life of the battery module under air cooling is longer than that of PCM cooling, although a larger life non-uniformity is observed. Furthermore, two methods are compared by a newly proposed evaluation index called cyclical cost. This index considers both the battery cycle life and the parasitic power consumption of the BTMS. The result demonstrates that air cooling has a lower cyclical cost than PCM cooling. When the inlet velocity of the air cooling system increases, the cyclical cost has a trend of decreasing first and then increasing. This paper provides a guide for the development of BTMS to further prolong the cycle life and reduce total operating cost of LIBs.

Thermal performance of a hybrid thermal management system that couples PCM/copper foam composite with air-jet and liquid cooling

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Air and PCM cooling for battery thermal management considering battery cycle life

Fin structure and liquid cooling to enhance heat transfer of composite phase change materials in battery thermal management system

Design and performance of a compact lightweight hybrid thermal management system using phase change material and liquid cooling with a honeycomb-like structure for prismatic lithium-ion batteries

A hybrid thermal management system with liquid cooling and composite phase change materials containing various expanded graphite contents for cylindrical lithium-ion batteries

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

A Compact Hybrid Battery Thermal Management System for Enhanced Cooling

Improving the Cooling Performance of Cylindrical Lithium-Ion Battery Using Three Passive Methods in a Battery Thermal Management System

Numerical study of thermal management of pouch lithium-ion battery based on composite liquid-cooled phase change materials with honeycomb structure

Passive and hybrid battery thermal management system by cooling flow control, employing nano-PCM, fins, and metal foam

Numerical analysis of lithium-ion battery thermal management system using phase change material assisted by liquid cooling method

A parametric study of a hybrid battery thermal management system that couples PCM/copper foam composite with helical liquid channel cooling

Thermal management of cylindrical battery pack based on a combination of silica gel composite phase change material and copper tube liquid cooling

Thermal management scheme and optimization of cylindrical lithium-ion battery pack based on air cooling and liquid cooling

Thermal performance and structural optimization of a hybrid thermal management system based on MHPA/PCM/liquid cooling for lithium-ion battery

Experimental Study of Battery Passive Thermal Management System Using Copper Foam-Based Phase Change Materials

Experimental Study on the Thermal Management Performance of Lithium‐Ion Battery Using Phase‐Change Material at Various Ambient Temperatures

PCM/metal foam and microchannels hybrid thermal management system for cooling of Li-ion battery

Optimization of the Heat Dissipation Performance of a Lithium-Ion Battery Thermal Management System with CPCM/Liquid Cooling

A hybrid battery thermal management system coupling with PCM and optimized thermoelectric cooling for high-rate discharge condition