Abstract:Thermal management strategies play an important role in the thermal safety of a power battery. Phase change material (PCM) cooling is considered the most competitive passive heat dissipation mode. In this paper, a novel nickel foam/paraffin (PA)/expanded graphite (EG) composite PCM (CPCM) is proposed for large-capacity prismatic lithium-ion battery modules. First, different proportions of nickel foam-based CPCMs were prepared. Second, the effects of different components of high thermally conductive additive EG on the thermal conductivity, thermal physical properties, thermal stability, and mechanical properties of the composites were studied in depth. Moreover, the fundamental reasons for the aforementioned property changes were analyzed from the microscopic point of view. The results showed that when the content of EG was 4 wt%, the thermal conductivity of the CPCMs approached the peak, which was 1.66 W/(m·K). The peak tensile strength and bending strength of the CPCMs were 2.75 and 6.59 MPa, respectively. The comprehensive analysis showed that adding 4 wt% of EG in the CPCMs was an optimum strategy. Eventually, these compound CPCMs were applied to a large-capacity prismatic lithium-ion power battery module. The experimental results demonstrated that compared with the natural air-cooling module and forced air-cooling module, the peak temperatures (T max ) of the CPCM cooling module were decreased by 19.52% and 5.79%, and the peak temperature differences (T max − T min ) were decreased by 38.15% and 35.41%, respectively. It is worth noting that even at a 1.5C high-rate uninterrupted charge/discharge cycle repeated five times, the highest temperature is always maintained below the safe temperature (55 °C), and the peak temperature difference is less than 5 °C, showing the dual advantages of the excellent temperature-controlling and temperature-equalizing abilities. The relevant outcomes will provide new ideas and theoretical value for the heat dissipation modes of large-capacity lithium-ion power batteries, ultimately promoting thermal safety performance.

Preparation of thermally conductive composite phase change materials and its application in lithium-ion batteries thermal management

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Experimental Analysis on the Thermal Management of Lithium-Ion Batteries Based on Phase Change Materials

Silicon dioxide-enhanced composite phase change materials for the thermal management of retired lithium-ion batteries

A novel flexible composite phase change material applied to the thermal safety of lithium-ion batteries

Copper foam reinforced polymer-based phase change material composites for more efficient thermal management of lithium-ion batteries

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Phase Change Material Coat for Battery Thermal Management with Integrated Rapid Heating and Cooling Functions from −40 °C to 50 °C

Fin structure and liquid cooling to enhance heat transfer of composite phase change materials in battery thermal management system

Experimental study of novel nickel foam-based composite phase change materials for a large-capacity lithium-ion power battery module

Probing the Cooling Effectiveness of Phase Change Materials on Lithium-Ion Battery Thermal Response under Overcharge Condition

Cutting Copper Fiber/paraffin Composite Phase Change Material Discharging Experimental Study Based on Heat Dissipation Capability of Li-ion Battery

Highly Thermal Conductive and Antileakage Composite Phase Change Materials Based on 3d Metal-Organic Networks for Battery Thermal Management

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Shape-stabilized phase change material based on MOF-derived oriented carbon nanotubes for thermal management of lithium-ion battery

Heat Transfer Performance Study on Several Composite Phase Change Materials for Battery Thermal Management

Bifunctional Liquid Metals Allow Electrical Insulating Phase Change Materials to Dual-Mode Thermal Manage the Li-Ion Batteries

Preparation and Application of Aluminum-Phenylphosphinate-Encapsulated Phase Change Materials for Thermal Management of Lithium-Ion Batteries

Thermal performance of nano-enhanced phase change material and air-based lithium-ion battery thermal management system: An experimental investigation

A novel stable and flexible composite phase change materials for battery thermal management

Preparation of SA–PA–LA/EG/CF CPCM and Its Application in Battery Thermal Management