Abstract:Thermal management strategies play an important role in the thermal safety of a power battery. Phase change material (PCM) cooling is considered the most competitive passive heat dissipation mode. In this paper, a novel nickel foam/paraffin (PA)/expanded graphite (EG) composite PCM (CPCM) is proposed for large-capacity prismatic lithium-ion battery modules. First, different proportions of nickel foam-based CPCMs were prepared. Second, the effects of different components of high thermally conductive additive EG on the thermal conductivity, thermal physical properties, thermal stability, and mechanical properties of the composites were studied in depth. Moreover, the fundamental reasons for the aforementioned property changes were analyzed from the microscopic point of view. The results showed that when the content of EG was 4 wt%, the thermal conductivity of the CPCMs approached the peak, which was 1.66 W/(m·K). The peak tensile strength and bending strength of the CPCMs were 2.75 and 6.59 MPa, respectively. The comprehensive analysis showed that adding 4 wt% of EG in the CPCMs was an optimum strategy. Eventually, these compound CPCMs were applied to a large-capacity prismatic lithium-ion power battery module. The experimental results demonstrated that compared with the natural air-cooling module and forced air-cooling module, the peak temperatures (T max ) of the CPCM cooling module were decreased by 19.52% and 5.79%, and the peak temperature differences (T max − T min ) were decreased by 38.15% and 35.41%, respectively. It is worth noting that even at a 1.5C high-rate uninterrupted charge/discharge cycle repeated five times, the highest temperature is always maintained below the safe temperature (55 °C), and the peak temperature difference is less than 5 °C, showing the dual advantages of the excellent temperature-controlling and temperature-equalizing abilities. The relevant outcomes will provide new ideas and theoretical value for the heat dissipation modes of large-capacity lithium-ion power batteries, ultimately promoting thermal safety performance.

Silicon dioxide-enhanced composite phase change materials for the thermal management of retired lithium-ion batteries

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Preparation of thermally conductive composite phase change materials and its application in lithium-ion batteries thermal management

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Experimental study of novel nickel foam-based composite phase change materials for a large-capacity lithium-ion power battery module

A novel flexible composite phase change material applied to the thermal safety of lithium-ion batteries

Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules

Diatom-Based Biomass Composites Phase Change Materials with High Thermal Conductivity for Battery Thermal Management

Experimental Study of a Passive Thermal Management System Using Expanded Graphite/Polyethylene Glycol Composite for Lithium-Ion Batteries

Experimental investigation on mitigation of thermal runaway propagation of lithium-ion battery module with flame retardant phase change materials

Thermal management of cylindrical battery pack based on a combination of silica gel composite phase change material and copper tube liquid cooling

Copper foam reinforced polymer-based phase change material composites for more efficient thermal management of lithium-ion batteries

Experimental Investigation on the Thermal Management for Lithium-Ion Batteries Based on the Novel Flame Retardant Composite Phase Change Materials

Experimental investigation on thermal management system with flame retardant flexible phase change material for retired battery module

Thermally conductive silicone composites modified by graphene-oxide aerogel beads loaded with phase change materials as efficient heat sinks

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Fin structure and liquid cooling to enhance heat transfer of composite phase change materials in battery thermal management system

Effect Analysis on Thermal Management of Power Batteries Utilizing a Form-Stable Silicone Grease/Composite Phase Change Material

Thermal performance of a hybrid thermal management system that couples PCM/copper foam composite with air-jet and liquid cooling

Numerical investigation on integrated thermal management for a lithium-ion battery module with a composite phase change material and liquid cooling

Experimental Study of Battery Passive Thermal Management System Using Copper Foam-Based Phase Change Materials