Abstract:Thermal management strategies play an important role in the thermal safety of a power battery. Phase change material (PCM) cooling is considered the most competitive passive heat dissipation mode. In this paper, a novel nickel foam/paraffin (PA)/expanded graphite (EG) composite PCM (CPCM) is proposed for large-capacity prismatic lithium-ion battery modules. First, different proportions of nickel foam-based CPCMs were prepared. Second, the effects of different components of high thermally conductive additive EG on the thermal conductivity, thermal physical properties, thermal stability, and mechanical properties of the composites were studied in depth. Moreover, the fundamental reasons for the aforementioned property changes were analyzed from the microscopic point of view. The results showed that when the content of EG was 4 wt%, the thermal conductivity of the CPCMs approached the peak, which was 1.66 W/(m·K). The peak tensile strength and bending strength of the CPCMs were 2.75 and 6.59 MPa, respectively. The comprehensive analysis showed that adding 4 wt% of EG in the CPCMs was an optimum strategy. Eventually, these compound CPCMs were applied to a large-capacity prismatic lithium-ion power battery module. The experimental results demonstrated that compared with the natural air-cooling module and forced air-cooling module, the peak temperatures (T max ) of the CPCM cooling module were decreased by 19.52% and 5.79%, and the peak temperature differences (T max − T min ) were decreased by 38.15% and 35.41%, respectively. It is worth noting that even at a 1.5C high-rate uninterrupted charge/discharge cycle repeated five times, the highest temperature is always maintained below the safe temperature (55 °C), and the peak temperature difference is less than 5 °C, showing the dual advantages of the excellent temperature-controlling and temperature-equalizing abilities. The relevant outcomes will provide new ideas and theoretical value for the heat dissipation modes of large-capacity lithium-ion power batteries, ultimately promoting thermal safety performance.

Diatom-Based Biomass Composites Phase Change Materials with High Thermal Conductivity for Battery Thermal Management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

High thermal conductivity composite phase change material with nano-Ag particles modified diatomite and expanded graphite for improving battery thermal management efficiency

High thermal conductive and anti-leakage composite phase change material with halloysite nanotube for battery thermal management system

High Antileakage and Thermal Conductivity Composite Phase-Change Material with Anisotropy Expanded Graphite for Battery Thermal Management

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Flexible Composite Phase-Change Material with Shape Recovery and Antileakage Properties for Battery Thermal Management

Study on the potential of multi-performance enhanced phase change materials in battery thermal management

Experimental Study of a Passive Thermal Management System Using Expanded Graphite/Polyethylene Glycol Composite for Lithium-Ion Batteries

High thermal conductivity composite phase change material with Zn 2+ metal organic gel and expanded graphite for battery thermal management

Experimental and numerical investigation of a battery thermal management system using a novel EVA-based thermal-induced flexible composite phase change material

Investigation on the Thermal Contact Resistance Mechanism of a Composite Phase Change Material for Battery Thermal Management

The intrinsic flame retardant multifunctional composite phase change material with phosphorus pentoxide for battery thermal safety system

Silicon dioxide-enhanced composite phase change materials for the thermal management of retired lithium-ion batteries

A novel stable and flexible composite phase change materials for battery thermal management

Composite phase change materials with carbon foam and fibre combination for efficient battery thermal management: Dual modulation roles of interfacial heat transfer

Experimental study of novel nickel foam-based composite phase change materials for a large-capacity lithium-ion power battery module

Heat Transfer Performance Study on Several Composite Phase Change Materials for Battery Thermal Management

Experimental investigation on room-temperature flexible composite phase change materials in thermal management of power battery pack