Abstract:Redox flow batteries are emerging as a promising method to provide grid-scale power and long-duration energy storage safely and economically. The thermally regenerative ammonia battery (TRAB) is a new redox flow battery category that can be recharged using low-grade waste heat rather than electric energy, adding further flexibility to the applicability of flow battery systems. Recently, a new TRAB with all-aqueous electroactive species (referred to as the Cu aq -TRAB), as opposed to deposition-dissolution reactions, was found to have superior energy and power densities relative to competing TRABs. The use of bromide and ammonia stabilizes for both Cu(I) and Cu(II) oxidation states, while also creating a cell potential of up to 1.0 V. The potential can be recovered by thermally separating ammonia from the electrolyte and adding it back to alternate electrolyte chambers in successive cycles. Potential improvements in overall cell performance are possible by reducing ohmic losses associated with membrane selection. However, the ideal membrane for the Cu aq -TRAB is not obvious and raises interesting transport questions relative to the dominant redox-active copper species being negatively charged in the catholyte but positively charged in the anolyte. Furthermore, membrane crossover of ammonia, a small, uncharged molecule, was previously shown to be a primary source of parasitic losses for TRABs. Therefore, we investigated how different membrane types (cation, anion, and non-selective) affected ion transport and TRAB performance. A batch symmetry cell was used to determine membrane conductivity in the Cu aq -TRAB environment and membrane diffusion coefficients of each species in the electrolytes. Flow cell experiments were also conducted to find peak power, energy density, average power during discharge, and capacity fade over successive electric charge/discharge cycles. Tradeoffs between membrane conductivity and permeability observed in the symmetry cell are manifested in flow cell results as either high peak and average power or high energy density and low capacity fade. These results expand on potential methods for controlling transport in redox flow batteries and demonstrate the potential for non-selective membranes for electrochemical energy technologies.

Graphene oxide modified membrane for alleviated ammonia crossover and improved electricity generation in thermally regenerative batteries

Alleviated ammonia crossover in thermally regenerative ammonia-based batteries by optimizing the introduced intermediate-chamber

Ammonia crossover in thermally regenerative ammonia-based batteries for low-grade waste heat recovery

Improved Electrical Power Production of Thermally Regenerative Batteries Using A Poly(Phenylene Oxide) Based Anion Exchange Membrane

Biomass waste-derived hierarchical porous composite electrodes for high-performance thermally regenerative ammonia-based batteries

An Electrolyte-Decoupled Ammonia Battery for Enhancing Electricity Production from Low-Grade Waste Heat

3-D printed gradient porous composite electrodes improve anodic current distribution and performance in thermally regenerative flow battery for low-grade waste heat recovery

Performance of a thermally regenerative ammonia-based battery using gradient-porous copper foam electrodes

Effect of operating parameters on the performance of thermally regenerative ammonia-based battery for low-temperature waste heat recovery

Decoupled Electrolytes Towards Enhanced Energy and High Temperature Performance of Thermally Regenerative Ammonia Batteries

Enhancing Low-Grade Thermal Energy Recovery in A Thermally Regenerative Ammonia Battery Using Elevated Temperatures

Understanding the Reaction Mechanism and Self-Discharge of a Bimetallic Thermally-Regenerative Ammonia Battery

High Power Thermally Regenerative Ammonia-Copper Redox Flow Battery Enabled by a Zero Gap Cell Design, Low-Resistant Membranes, and Electrode Coatings

The Impacts of Electrolyte Composition on Key Performance Metrics of the All-Aqueous Copper Thermally Regenerative Ammonia Battery

Inhibiting Anodic Parasitic Reaction for High-Performance Al-air Batteries Via a Multi-Functional Hybrid Additive

Power generation enhancement of a membrane-free thermally regenerative battery induced by the density difference of electrolytes

Improving Performance And Cyclability Of Zinc-Silver Oxide Batteries By Using Graphene As A Two Dimensional Conductive Additive

Simultaneously Regulating Uniform Zn2+ Flux and Electron Conduction by MOF/rGO Interlayers for High-Performance Zn Anodes

A bimetallic thermally regenerative ammonia-based battery for high power density and efficiently harvesting low-grade thermal energy

Power and energy capacity tradeoffs in an all-aqueous copper thermally regenerative ammonia battery

Membrane Transport and Performance in the All-Aqueous Copper Thermally Regenerative Battery