Membrane Transport and Performance in the All-Aqueous Copper Thermally Regenerative Battery
Nicholas R. Cross,Renaldo E Springer,Matthew J. Rau,Seguei N Lvov,Bruce E. Logan,Christopher A. Gorski,Derek M. Hall
DOI: https://doi.org/10.1149/ma2022-0218mtgabs
2022-11-24
ECS Meeting Abstracts
Abstract:Redox flow batteries are emerging as a promising method to provide grid-scale power and long-duration energy storage safely and economically. The thermally regenerative ammonia battery (TRAB) is a new redox flow battery category that can be recharged using low-grade waste heat rather than electric energy, adding further flexibility to the applicability of flow battery systems. Recently, a new TRAB with all-aqueous electroactive species (referred to as the Cu aq -TRAB), as opposed to deposition-dissolution reactions, was found to have superior energy and power densities relative to competing TRABs. The use of bromide and ammonia stabilizes for both Cu(I) and Cu(II) oxidation states, while also creating a cell potential of up to 1.0 V. The potential can be recovered by thermally separating ammonia from the electrolyte and adding it back to alternate electrolyte chambers in successive cycles. Potential improvements in overall cell performance are possible by reducing ohmic losses associated with membrane selection. However, the ideal membrane for the Cu aq -TRAB is not obvious and raises interesting transport questions relative to the dominant redox-active copper species being negatively charged in the catholyte but positively charged in the anolyte. Furthermore, membrane crossover of ammonia, a small, uncharged molecule, was previously shown to be a primary source of parasitic losses for TRABs. Therefore, we investigated how different membrane types (cation, anion, and non-selective) affected ion transport and TRAB performance. A batch symmetry cell was used to determine membrane conductivity in the Cu aq -TRAB environment and membrane diffusion coefficients of each species in the electrolytes. Flow cell experiments were also conducted to find peak power, energy density, average power during discharge, and capacity fade over successive electric charge/discharge cycles. Tradeoffs between membrane conductivity and permeability observed in the symmetry cell are manifested in flow cell results as either high peak and average power or high energy density and low capacity fade. These results expand on potential methods for controlling transport in redox flow batteries and demonstrate the potential for non-selective membranes for electrochemical energy technologies.