Abstract:Sustainable electrical energy storage devices are an effective solution for the fossil fuel-based electrical power systems and aid in abating the environmental pollution. In this study, we design a sustainable and green approach for producing hard carbon from the biomass feedstock of waste mango peels through a simple carbonization route at low and high temperatures, namely, 600 °C (C600) and 1000 °C (C1000), respectively. The resultant hard carbon is used as an anode for lithium-ion batteries. The sample prepared at higher temperature exhibits a higher reversible cyclic capacity and rate capability than the sample prepared at low temperature. The C1000 sample delivers a reversible discharge capacity of 801 mA h g–1 at 100 mA g–1 and sustains a discharge capacity of 628 mA h g–1 over 200 cycles. The hard carbon electrode cell has a high capacitive charge and stable plateau capacity, indicating that the performance of the C1000 cell is good. Moreover, the higher specific surface area and hierarchical porous structure provide more Li-ion active sites, faster diffusion kinetics, and higher electronic conductivity during the charge/discharge process. The hard carbon derived from mango peels is a potential candidate for use in advanced large-scale energy storage applications. Specifically, this work presents a sustainable approach to achieve eco-friendly and cost-effective waste biomass management for energy applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.1c01226?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.1c01226</a>.Material characterization and electrochemical performance details; TGA of mango peels and derived carbon samples; SEM/energy-dispersive X-rays spectroscopy (EDX) of crushed MP; EDX spectra of mango-peel-derived C (C600 and C1000); presence of CHNSO element weight % via elemental analyses; ex situ XPS survey scan of mango peels calcined at 200, 400, 600, 800, and 1000 °C without further treatment; ex situ XPS nanoscans spectra of C 1s, O 1s, and N 1s; ex situ XPS binding energy and their assignments and estimated atomic % values; survey scan XPS spectra of C600 and C1000 samples; initial three cycles with prolonged specified discharge/charge profiles; comparison of ICEs; plateau/slope contribution charge capacities of C600 and C1000 electrode cells; comparison of reversible cyclic capacity obtained in this study with those obtained in the literature; reversible discharge cycle slope/plateau contribution at different current densities; different scan rate CV curves; potential versus calculated b values; capacitive and diffusive contributions at scan rates of 0.1 and 1.0 mV s–1; EIS spectra of the C600 and C1000 electrode cells; and in situ operando XRD analysis of the C1000 cell (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.1c01226/suppl_file/ef1c01226_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Biomass Feedstock of Waste Mango-Peel-Derived Porous Hard Carbon for Sustainable High-Performance Lithium-Ion Energy Storage Devices

A Green Route N, S-Doped Hard Carbon Derived from Fruit-Peel Biomass Waste as an Anode Material for Rechargeable Sodium-Ion Storage Applications

Preparation of Biomass-Derived Carbon Loaded with MnO2 As Lithium-Ion Battery Anode for Improving Its Reversible Capacity and Cycling Performance

Navel orange peel-derived hard carbons as high performance anode materials of Na and Li-ion batteries

Facile preparation of bio-waste-derived porous carbon for high-performance electrode material for energy storage applications: Li-ion capacitor and Li-ion batteries

A Stable Biomass‐Derived Hard Carbon Anode for High‐Performance Sodium‐Ion Full Battery

Deconstruction Engineering of Lignocellulose Toward High-Plateau-Capacity Hard Carbon Anodes for Sodium-Ion Batteries

High performance of activated carbons prepared from mangosteen (Garcinia mangostana) peels using the hydrothermal process

Molten Salt-Mediated Hierarchical Porous Carbon Derived from Biomass Waste for High-Performance Capacitive Storage

Fabrication of a Biomass-Derived Activated Carbon-Based Anode for High-Performance Li-Ion Batteries

Biomass-Derived Porous Carbon with Micropores and Small Mesopores for High-Performance Lithium-Sulfur Batteries

Biomass-Derived Graphitic Carbon/Co 3 O 4 Nanocomposites with Pseudocapacitance for Lithium Storage

Comparison and Optimization of Biomass-Derived Hard Carbon As Anode Materials for Sodium-Ion Batteries

Mild chemical-activated hydrothermal porous carbon derived from durian peel biomass for an electrochemical supercapacitor

Optimizing Synthesis Temperature for Lignin-Derived Hard Carbon Anode for High Cycling Capacity in Sodium-Ion Batteries

Biomass Alginate Derived Oxygen-Enriched Carbonaceous Materials with Partially Graphitic Nanolayers for High Performance Anodes in Lithium-Ion Batteries

Porous carbon derived from a by-product of traditional Chinese medicine for high-performance aqueous zinc-ion hybrid supercapacitors

Extended Plateau Capacity of Hard Carbon Anode for High Energy Lithium‐Ion Batteries

Biomass-Derived Carbon for High-Performance Lithium-Sulfur Batteries

Sustainable and efficient energy storage: A sodium ion battery anode from Aegle marmelos shell biowaste