Abstract:Developing hard carbon with a high initial Coulombic efficiency (ICE) and very good cycling stability is of great importance for practical sodium-ion batteries (SIBs). Defects and oxygen-containing groups grown along either the carbon edges or the layers, however, are inevitable in hard carbon and can cause a tremendous density of irreversible Na+ sites, decreasing the efficiency and therefore causing failure of the battery. Thus, eliminating these unexpected defect structures is significant for enhancing the battery performance. Herein, we develop a strategy of applying a soft-carbon coating onto free-standing hard-carbon electrodes, which greatly hinders the formation of defects and oxygen-containing groups on hard carbon. The electrochemical results show that the soft-carbon-coated, free-standing hard-carbon electrodes can achieve an ultrahigh ICE of 94.1% and long cycling performance (99% capacity retention after 100 cycles at a current density of 20 mA g–1), demonstrating their great potential in practical sodium storage systems. The sodium storage mechanism was also investigated by operando Raman spectroscopy. Our sodium storage mechanism extends the "adsorption–intercalation–pore filling–deposition" model. We propose that the pore filling in the plateau area might be divided into two parts: (1) sodium could fill in the pores near the inner wall of the carbon layer; (2) when the sodium in the inner wall pores is close to saturation, the sodium could be further deposited onto the existing sodium.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c12171.Digital picture of the material sandwiched between graphite boards, and SEM image of the carbon paper; digital photograph of large size carbon paper; comparison of XRD, Raman, and infrared spectra of soft carbon; rate performance of HC-P-1200; Nyquist plots of HC-P-1200 and HC-W-1200; full information on operando Raman spectra of the charge–discharge process; periodic variation of the intensity of the charge–discharge for the first cycle, and slope of the second cycle at 1000 and 2000 cm–1 Raman shift (PDF)This article has not yet been cited by other publications.

Realizing Improved Sodium-Ion Storage by Introducing Carbonyl Groups and Closed Micropores into a Biomass-Derived Hard Carbon Anode

Biomass‐Derived Phosphorus‐Doped Porous Hard Carbon Anode for Stable and High‐Rate Sodium Ion Batteries

Nitrogen/Phosphorus Dual‐Doped Hard Carbon Anode with High Initial Coulombic Efficiency for Superior Sodium Storage

Soft-Carbon-Coated, Free-Standing, Low-Defect, Hard-Carbon Anode To Achieve a 94% Initial Coulombic Efficiency for Sodium-Ion Batteries

Boosting Sodium Storage Performance of Hard Carbon Anodes by Pore Architecture Engineering

P-doped spherical hard carbon with high initial coulombic efficiency and enhanced capacity for sodium ion batteries

Design advanced nitrogen/oxygen co-doped hard carbon microspheres from phenolic resin with boosted Na-storage performance

Enhancing the sodium storage performance of hard carbon by constructing thin carbon coatings via esterification reactions

Molecular Engineering Enabling High Initial Coulombic Efficiency and Rubost Solid Electrolyte Interphase for Hard Carbon in Sodium‐Ion Batteries

Hard carbon with an opened pore structure for enhanced sodium storage performance

Coupled Carbonization Strategy towards Advanced Hard Carbon for High Energy Sodium-Ion Battery.

Hard carbon anodes derived from phenolic resin/sucrose cross‐linking network for high‐performance sodium‐ion batteries

High temperature induced abundant closed nanopores for hard carbon as high-performance sodium-ion batteries anodes

Ameliorating the Sodium Storage Performance of Hard Carbon Anode Through Rational Modulation of Binder

Pyridinic N‐Dominated Hard Carbon with Accessible Carbonyl Groups Enabling 98% Initial Coulombic Efficiency for Sodium‐Ion Batteries

Understanding the Sodium Storage Behavior of Closed Pores/Carbonyl Groups in Hard Carbon

Coupled Carbonization Strategy toward Advanced Hard Carbon for High-Energy Sodium-Ion Battery

Sulfur and phosphorus co-doped hard carbon derived from oak seeds enabled reversible sodium spheres filling and plating for ultra-stable sodium storage

Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes

Biomass hard carbon of high initial coulombic efficiency for sodium-ion batteries: Preparation and application

Scalable synthesis of N/S co-doped hard carbon microspheres as a high-performance anode material for sodium-ion batteries