Abstract:Infrared temperature measurements are common in fire research and adjacent fields to provide spatially-resolved temperature distributions on surfaces. To obtain accurate temperature values from these instruments, a well-characterized emissive surface is desired to minimize error in the calculated values. In fire applications, the robustness of the surface coating is also an important consideration. To this end, surfaces to be measured with infrared thermal cameras are commonly coated with a high-emissivity coating to reduce uncertainty in measurements. Here, the optical properties and thermal stability of a set of commercially available paints were characterized to assess their suitability for future applications and to provide a reference dataset for researchers. The thermal stability of the paints was assessed using thermogravimetry to measure degradation at elevated temperatures. Emissivity was determined spectrally at room temperature and as a band-averaged value as a function of temperature for long-wave infrared thermography applications. Differences were revealed in these tests, indicating a need to carefully select coatings based on the application, giving consideration to the exposure temperature, optical-sensing band, and dynamic emissivity input for temperature-varying environments. Properties collected were verified against a bench-scale experiment with flame exposure, demonstrating the accuracy and usefulness of infrared thermography in fire research applications.

Research and Application of Thermal Indicating Paint in Aeroengine Test

Study on Temperature Indicating Paint for Surface Temperature Measurement—A Review

Improved Apparatus for Inline Measurement of Residence Time Distribution of Thermomechanically Complex Systems

High-Temperature And High-Speed Abadable Tester For Abradability Test Of Seal Coatings

Radiative Thermal Coats for Passive Temperature Management

Temperature-indicating Paints

Surface temperature measurement of gas turbine combustor using temperature-indicating paint

Investigation on High Temperature Coated Thermocouple for Aeroengine

A Review Of Aero-Engine Turbine Blade Temperature Measurement

Research on Cylinder Head Thermal State Simulation

Advances in the application of non-contact temperature measurement technology for aero-engine blade.

Emissivity Measurement of Aero-engine Turbine Blade

Characterization of high-temperature paints for infrared thermography in fire research

A thermal performance factor for evaluation of active engine cooling with asymmetric heating

Constant temperature line identification on prototype gas turbine combustor with multi-colour change coating

Design and performance verification of thermal protection structure of high temperature probe in aeroengine

High temperature imaging dynamic measurement techniques under harsh experimental environment

Surface temperature measurement based on reflectance spectrum of temperature indicating paint and machine learning algorithms

Development of a new class of temperature-sensitive paints operating in the green spectrum of light for aerodynamic flow applications

MEASUREMENT AND ANALYSIS OF THERMAL PERFORMANCE OF POWER DEVICES

High temperature heat flux sensor with ITO/In2O3 thermopile for extreme environment sensing