Abstract:The objective of the EU project “Sensors Towards Advanced Monitoring and Control of Gas Turbine Engines (acronym STARGATE)” is the development of a suite of advanced sensors, instrumentation and related systems in order to contribute to the developing of the next generation of green and efficient gas turbine engines. One work package of the project deals with the design and development of a long wavelength infrared (LWIR) radiation thermometer for the non-contact measurement of the surface temperature of thermal barrier coatings (TBCs) during the operation of gas turbine engines.For opaque surfaces (e.g. metals or superalloys) radiation thermometers which are sensitive in the near or short wavelength infrared are used as state-of-the-art method for non-contact temperature measurements. But this is not suitable for oxide ceramic based TBCs (e.g. partially yttria stabilized zirconia) as oxide ceramics are semi-transparent in the near and short wavelength infrared spectral region. Fortunately the applied ceramic materials are non-transparent in the long wavelength infrared and additionally exhibit a high emittance in this wavelength region.Therefore, a LWIR pyrometer can be used for non-contact temperature measurements of the surfaces of TBCs as such pyrometers overcome the described limitation of existing techniques. For performing non-contact temperature measurements in gas turbines one has to know the infrared-optical properties of the applied TBCs as well as of the hot combustion gas in order to properly analyse the measurement data. For reaching a low uncertainty on the one hand the emittance of the TBC should be high (>0.9) in order to reduce reflections from the hot surrounding and on the other hand the absorbance of the hot combustion gas should be low (<0.1) in order to decrease the influence of the gas on the measured signal.This paper presents the results of the work performed by the authors with focus on the implementation of the LWIR pyrometer and the selection of the optimal wavelength band where the detector should be sensitive. Besides determining the spectral infrared-optical properties (emittance, transmittance and absorbance) of the TBCs and the hot combustion gas at high temperatures up to 1700K, the wavelength specification of the developed LWIR pyrometer is defined. Also an overview of the LWIR radiation thermometer is given and the preliminary results for different temperatures and environmental conditions are presented. Finally the measurement uncertainty of the LWIR-pyrometer is deduced.

Constant temperature line identification on prototype gas turbine combustor with multi-colour change coating

Surface temperature measurement of gas turbine combustor using temperature-indicating paint

A TEMPERATURE-GRADIENT CORRECTION METHOD FOR FILM COOLING EFFECTIVENESS MEASUREMENT USING ENDOSCOPE-BASED PSP TECHNIQUE

Study on Temperature Indicating Paint for Surface Temperature Measurement—A Review

Thermal barrier coated surface modifications for gas turbine film cooling: a review

A New Method of Making Thin-Film Thermocouples at Sharp Surfaces of Aero-engine Hot Component

On-line Detection of Porosity Change of High Temperature Blade Coating for Gas Turbine

Long wavelength infrared radiation thermometry for non-contact temperature measurements in gas turbines

Improved Liquid-Crystal Thermometry Excluding Human Color Sensation

Surface temperature measurement based on reflectance spectrum of temperature indicating paint and machine learning algorithms

Development of a new class of temperature-sensitive paints operating in the green spectrum of light for aerodynamic flow applications

Correction Method for Film Cooling Effectiveness Measurement with Temperature Gradient Using Endoscopic PSP and TSP Technique

Laser deposited high temperature thin film sensors for gas turbines

Intelligent Temperature Measuring Thermal Spray Multilayer Thermal Barrier Coatings Based on Embedded Thin Film Thermocouples

Comparative Study of Barrier Coatings on Turbine Blade Cooling

Novel Strategy for Thermal Evaluation of Film-Cooled Blades Using Thermographic Phosphors at Simulated Engine Conditions

High Temperature Thin-Film Sensor Technologies For Advanced Propulsion Materials

Particle surface temperature measurements with multicolor band pyrometry

Development of A Multi-Spectral Pyrometry Sensor for High-Speed Transient Surface-Temperature Measurements in Combustion-Relevant Harsh Environments

Infrared thermography with non-uniform heat flux boundary conditions on the rotor endwall of an axial turbine

Measurement of Flame's Temperature Field Based on Image Processing