Abstract:Radiative properties are critical to quantify radiative energy fluxes between surfaces and in participating media. However, there is limited experimental data on temperature-dependent radiative properties of materials. This work focuses on experimentally measuring temperature-dependent diffuse reflectance in the near- and mid-infrared spectra (1–20 μm) for ceramic particles with applications as heat-transfer and thermal-storage media in concentrated solar power (CSP) plants. Specifically, a commercially available sintered bauxite proppant, ACCUCAST ID80, and its primary chemical constituents—alumina (Al2O3) and silica (SiO2)—are measured in powder form using a Fourier transform infrared spectrometer (FTIR) coupled with a specialized diffuse reflectance accessory and a heated stage. Room-temperature diffuse reflectance measurements show increased absorption in tests with greater mass fractions of the ceramic samples. There is a strong correlation in the measured reflectance spectra of ACCUCAST with alumina and silica in the spectral range 2000–500 cm−1 (5–20 μm). Whereas, for shorter wavelengths (<5μm), the absorptance for ACCUCAST is greater than the absorptance for alumina and silica, indicating contributions from other chemical species present in the composite material. For the first time, temperature-dependent diffuse reflectance measurements are reported for ACCUCAST up to 1000 °C. These results are compared against those of alumina and silica through the calculation of a thermal emittance. All three materials exhibit a calculated emittance of ∼0.9 at room temperature. However, this value decreases to ∼0.6 for ACCUCAST and drops to less than 0.4 for alumina and silica at 1000 °C. Thermal cycling in air at 1000 °C resulted in a visible color change from dark grey to light orange for ACCUCAST and a subsequent larger increase in reflectance for wavelengths less than 5 μm as compared to ACCUCAST thermally cycled at 1000 °C in vacuum. Alumina and silica spectra proved to be largely unaffected by thermal cycling under atmospheric conditions. Overall, this study establishes a powerful technique for the characterization of radiative properties of particulate materials as a function of temperature and presents a detailed case study of ACCUCAST, a candidate for next-generation particle-based CSP.

Characterization of high-temperature paints for infrared thermography in fire research

Surface temperature and emissivity measurement for materials exposed to a flame through two-color IR-thermography

Research on Temperature Distribution of Combustion Flames Based on High Dynamic Range Imaging

Upconverting thermal history paint for investigations of short thermal events

Infrared thermometry in high temperature materials processing: influence of liquid water and steam

New experimental device for high-temperature normal spectral emissivity measurements of coatings

Study on Temperature Indicating Paint for Surface Temperature Measurement—A Review

Experimental Study on Flame Temperature Measurement by Infrared Thermography

Thermal Emissivity Measurement with Two-temperature Method

Characterisation of thermal property of materials by infrared thermography

Study on Method for Measuring Coating Emissivity by Applying Active Irradiation Based on Infrared Thermal Imager

The use of infrared thermography for materials characterization

High-Speed Infrared Radiation Thermometer for the Investigation of Early Stage Explosive Development and Fireball Expansion

Evaluation of building materials using infrared thermography

Temperature measurements using multicolor pyrometry in thermal radiation heating environments.

Infrared thermographic measurement of the surface temperature and emissivity of glossy materials

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

In situ multi-band apparent emissivity measurements of aerospace materials in inductively coupled plasma flows

Temperature-dependent diffuse reflectance measurements of ceramic powders in the near- and mid-infrared spectra

Research on Through-Flame Imaging Using Mid-Wave Infrared Camera Based on Flame Filter

Variable Emissivity Materials for Thermal Radiators: Methods for Characterizing Thermochromic Infrared Surfaces