Abstract:A method to simultaneously measure two-dimensional temperature and emissivity distributions on high-temperature diffuse surfaces is developed using an auxiliary light source. The high-temperature diffuse surface is irradiated from the hemispherical space with the auxiliary light source switched “on” or “off.” Two images of the effective radiation intensity are obtained in quick succession for the two states to determine the temperature and emissivity distributions. The measurement method and uncertainty models show that the effect of the unknown emissivity on the accuracy of the temperature field measurement can be eliminated. The optical pyrometer is a color charge coupled device (CCD) sensor with a quartz lamp array used as the auxiliary light source to illustrate the measurement method. An oxidized W–Ni–Fe alloy sample is heated at high temperatures of 600–1000 °C by a 700 W induction-heating device. The distributions of the effective radiation intensities from the sample surface during the “on” and “off” states of the lamp array are measured in the three color channels (R, G, and B channels) to calculate the temperature and emissivity distributions. The temperature measurement uncertainties are less than 4 °C for a temperature range of 600–900 °C. The temperature measurements are experimentally validated by the thermocouple method only with a small temperature difference. The emissivities calculated from the three color channels are very close with a range of 0.855–0.957. The relative uncertainties in the emissivities for channels R and G are less than 2.0%, while the relative uncertainty for channel B data was higher at 2.8% and 7.5% due to lower measurement signals in channel B. This analysis may provide a useful method for measuring the temperatures of high-temperature diffuse surfaces by successfully compensating for the effects of unknown or changing emissivities.

Thermal Emissivity Measurement with Two-temperature Method

Guidelines for measurement of thermal emission

Measuring Non-Equilibrium and Temperature-Dependent Thermal Emitters

Precision Measurements of Temperature‐Dependent and Nonequilibrium Thermal Emitters

Measuring Thermal Emission Near Room Temperature Using Fourier-Transform Infrared Spectroscopy

An Efficient Temperature Calibration Method Based on the Improved Infrared Forward Model and Bayesian Inference

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

Study on Method for Measuring Coating Emissivity by Applying Active Irradiation Based on Infrared Thermal Imager

Thermal-emission measurements near room temperature using Fourier-transform infrared spectroscopy

Infrared emissivity measurement methods considering target reflective characteristics

Measurements of the directional spectral emissivity based on a radiation heating source with alternating spectral distributions

Progress in Measuring Techniques and Thermal Radiative Properties of Metals at Cryogenic Temperatures: A Review

Simultaneous measurement of normal spectral emissivity and temperature of materials with low thermal conductivity

Simultaneous measurements of high-temperature total hemispherical emissivity and thermal conductivity using a steady-state calorimetric technique

Measurement of High-Temperature Spectral Emissivity Using Integral Blackbody Approach

Peculiarities Of Near-Room-Temperature Thermal-Emission Measurements Using Ftir Spectroscopy

A Method for Measuring Thermal Radiation Properties of Semi-Transparent Materials

Analyses of Spectral Emissivity in Radiation Temperature Measurement

Measurement of Spectral Emissivity of Object Based on Infrared Radiometer

Tri-waveband method for temperature measurement of the object with monotonic emissivity property

Transient Calorimetric Measurement Method for Total Hemispherical Emissivity