Abstract:A method to simultaneously measure two-dimensional temperature and emissivity distributions on high-temperature diffuse surfaces is developed using an auxiliary light source. The high-temperature diffuse surface is irradiated from the hemispherical space with the auxiliary light source switched “on” or “off.” Two images of the effective radiation intensity are obtained in quick succession for the two states to determine the temperature and emissivity distributions. The measurement method and uncertainty models show that the effect of the unknown emissivity on the accuracy of the temperature field measurement can be eliminated. The optical pyrometer is a color charge coupled device (CCD) sensor with a quartz lamp array used as the auxiliary light source to illustrate the measurement method. An oxidized W–Ni–Fe alloy sample is heated at high temperatures of 600–1000 °C by a 700 W induction-heating device. The distributions of the effective radiation intensities from the sample surface during the “on” and “off” states of the lamp array are measured in the three color channels (R, G, and B channels) to calculate the temperature and emissivity distributions. The temperature measurement uncertainties are less than 4 °C for a temperature range of 600–900 °C. The temperature measurements are experimentally validated by the thermocouple method only with a small temperature difference. The emissivities calculated from the three color channels are very close with a range of 0.855–0.957. The relative uncertainties in the emissivities for channels R and G are less than 2.0%, while the relative uncertainty for channel B data was higher at 2.8% and 7.5% due to lower measurement signals in channel B. This analysis may provide a useful method for measuring the temperatures of high-temperature diffuse surfaces by successfully compensating for the effects of unknown or changing emissivities.

Precision Measurements of Temperature‐Dependent and Nonequilibrium Thermal Emitters

Measuring Non-Equilibrium and Temperature-Dependent Thermal Emitters

Guidelines for measurement of thermal emission

Thermal Emissivity Measurement with Two-temperature Method

Characterization of near-room-temperature thermal emitters

Spectral emittance measurements of micro/nanostructures in energy conversion: a review

Thermal-emission measurements near room temperature using Fourier-transform infrared spectroscopy

Materials and Devices for Engineering of Thermal Light: Feature Issue Introduction

Measuring Thermal Emission Near Room Temperature Using Fourier-Transform Infrared Spectroscopy

Thermionic Energy Conversion with Nanoscale Materials and Devices

Advances in Thermal Plasma Temperature Diagnostic Methods

Spatially Resolved Dynamically Reconfigurable Multilevel Control of Thermal Emission

Accurate Direct Measurements of Far-Field Thermal Infrared Emission and its Dynamics

Progress in Measuring Techniques and Thermal Radiative Properties of Metals at Cryogenic Temperatures: A Review

Peculiarities Of Near-Room-Temperature Thermal-Emission Measurements Using Ftir Spectroscopy

Measurements of Temperature and Emissivity Distributions on a High-Temperature Surface Using an Auxiliary Light Source Method

Nanophotonic engineering of far-field thermal emitters

A High Precision and Multifunctional Electro-Optical Conversion Efficiency Measurement System for Metamaterial-Based Thermal Emitters

Temperature Measurements of High-Temperature Surface in Environments with Interfering Radiation Using Luminescence Lifetime Thermometry

Temperature Control of Thermal Radiation from Composite Bodies

First Principle Measurements of Thermal Emittance for Copper and Magnesium