Abstract:In order to improve the pretreating efficiency of single crystal diamond (SCD) before its homoepitaxial growth, a strategy coupling laser cutting and microwave hydrogen plasma etching was proposed to replace the traditional pretreatment steps, which underwent laser cutting, mechanical polishing, acid cleaning, and microwave plasma etching in order. The feasibility of this idea has been studied by growing SCD after directly etching its laser-cut surface using microwave hydrogen plasma. The effect of the etching time on the SCD including surface phase, etching morphology, etching pit shape, residual stress, growth morphology, and quality of SCD are investigated and analyzed. The results show that microwave hydrogen plasma etching can quickly (within 10 min) remove the residual graphite carbon on the SCD surface caused by laser cutting. The extension of the etching time mainly affects the surface morphology and the internal stress of SCD. Etching pits with different shapes (square, trapezoid, inverted pyramid) and sizes can be found on the hydrogen plasma etched surface under different etching times. Fortunately, these etching pits do not introduce polycrystals on the SCD during subsequent homoepitaxial growth. All the hydrogen plasma etched laser cut SCD samples exhibit typical step-flow growth morphology after 20 h of homoepitaxial growth. Moreover, the step-flows are orderly and parallel, which is better than the disorderly step-flows on the polished SCD. Besides, a higher growth quality and a lower residual stress are obtained for the etched SCD. The above results indicate that replacing the traditional complex pretreatment steps with laser cutting and etching pretreatment is feasible. The new approach can effectively improve the pretreatment efficiency and result in superior quality of SCD after homoepitaxial growth.

Homoepitaxial lateral growth of single-crystal diamond with eliminating PCD rim and enlarging surface area

The effects of self-assembling off-angles on the homoepitaxial lateral outward growth of single-crystal diamond

Multiple Enlarged Growth of Single Crystal Diamond by MPCVD with PCD-rimless Top Surface

Homoepitaxy Growth of Single Crystal Diamond under 300 torr Pressure in the MPCVD System

Evolution of surface morphology and optical transmittance of single crystal diamond film by epitaxial growth

Epitaxial lateral growth of single-crystal diamond under high pressure by a plate-to-plate MPCVD

Recent progress in homoepitaxial single-crystal diamond growth via MPCVD

Vertical-substrate Epitaxial Growth of Single-Crystal Diamond by Microwave Plasma-Assisted Chemical Vapor Deposition

High-rate Growth of CVD Single-Crystal Diamond and Its Application

Surface Morphology and Spectroscopic Features of Homoepitaxial Diamond Films Prepared by MWPACVD at High CH4 Concentrations

The lateral outward growth of single-crystal diamonds by two different structures of microwave plasma reactor

Microwave hydrogen plasma etching on the laser-cut surface of single crystal diamond: Phases, etching morphology, stress evolution and the effect of etching on the subsequent homoepitaxial growth

Growth and Characterization of the Laterally Enlarged Single Crystal Diamond Grown by Microwave Plasma Chemical Vapor Deposition

Homoepitaxial Growth of Multiple 4H-Sic Wafers Assembled in a Simple Holder Via Conventional Chemical Vapor Deposition

Recent Progress in Hetero-Epitaxial Growth of the Single-Crystal Diamond

Evolution of growth characteristics around the junction in the mosaic diamond

Basal Plane Bending of Homoepitaxial MPCVD Single-Crystal Diamond

High-rate growth of single-crystal diamond with an atomically flat surface by microwave plasma chemical vapor deposition

Surface Morphology and Microstructure Evolution of Single Crystal Diamond during Different Homoepitaxial Growth Stages

Recent advances in high-growth rate single-crystal CVD diamond

Optimization Design of MPCVD Single Crystal Diamond Growth Based on Plasma Diagnostics