Abstract:Catalytic oxidative dehydrogenation of methanol to formaldehyde was carried out over Ag-SiO2-Al2O3 catalysts prepared by a sol-gel method. Detailed preparation conditions were investigated and the optimal preparation parameters were determined as the Si/Al molar ratio of 8.5/1.5-9/1, silver loading of 20 wt%, and calcination temperature of 900-1000 degreesC with ethanol as the solvent. Under optimum reaction conditions, i.e., the reaction temperature of 640 degreesC, O-2/CH3OH molar ratio of 0.39 with space velocity (GHSV) of 1.2 x 10(5) h(-1), the as-prepared catalyst exhibits excellent activity and selectivity. The yield of formaldehyde reaches 91%, much higher than that obtained over the pumice-supported silver catalyst (75%) and even higher than that over the commercial electrolytic silver catalyst (85%). Based on combined characterizations, such as X-ray photoelectron spectroscopy and X-ray-excited Auger electron spectroscopy (XPS and XAES), nitrogen adsorption at low temperature, thermogravimetry and differential thermogravimetry (TG-DTG), differential thermal analysis (DTA), diffuse reflectance ultraviolet visible spectroscopy (UV-vis DRS), temperature-programmed reduction (TPR), scanning electron micrograph (SEM), X-ray diffraction (XRD), etc., the correlation of the catalytic performance to the structural properties of the Ag-SiO2-Al2O3 catalyst is discussed in detail. It is found that almost all the catalysts are glass-like and nonporous with a surface area of similar to 1 m(2)/g. In the catalysts with silver loading lower than 20 wt%, all the silver species are present as Ag+ ions before the reaction and the catalyst is ultrathermally stable even under elevated temperatures at 1100 degreesC owing to the stabilizing effect of the [AlO4] group. Higher Ag loading in the catalysts leads to the presence of metallic silver species over the surface of the catalyst. During the catalytic reaction, Ag+ ions are partially reduced to metallic Ag. These nano-sized Ag particles act as the active centers and the superior catalytic performance of the Ag-SiO2-Al2O3 catalyst is attributed to its unique surface structure and the strong interactions between the support and the active phase. (C) 2004 Elsevier Inc. All rights reserved.

Synthesis of a Novel Highly Active NiMoO4 Nanocatalyst for the Sustainable Production of Anhydrous Formaldehyde from the Non-oxidative Dehydrogenation of Methanol at Relatively Low Temperature

Highly Dispersed CrOx Nanoparticle-Modified NaZSM-5 for Dehydration of Methanol to Dimethyl Ether

Ag–SiO2–Al2O3 Composite As Highly Active Catalyst for the Formation of Formaldehyde from the Partial Oxidation of Methanol

A Highly Active NiMoAl Catalyst Prepared by a Solvothermal Method for the Hydrogenation of Methyl Acrylate

Novel Highly Active Ag–SiO 2 –MgO Catalysts Used for Direct Dehydrogenation of Methanol to Anhydrous Formaldehyde

Logical Formulation and In-Situ Assembly of MnCo2O4@MnO2 Nanoflower Arrays on Nickel Foam As Monolithic Catalyst for Formaldehyde Degradation at Indoor Temperature

Pt/NiCo2O4 nanowire arrays on Ni foam as catalysts for efficient formaldehyde oxidation at room temperature

Highly selective and efficient hydrogenation of fatty acids to alcohols using NiMo@C catalyst

A first-principles study on Ni-decorated MoS2 for efficient formaldehyde degradation over a wide temperature range

Selective dehydrogenation of aqueous formic acid over multifunctional γ-Mo2N catalysts at a temperature lower than 100 ℃

Preparation of Hydrothermally Stable, Basic, and Highly Active Nano Nickel Catalysts for the Hydrodeoxygenation of N,N-dimethylformamide

Novel highly active Ag–SiO2–Al2O3–ZnO catalyst for the production of anhydrous HCHO from direct dehydrogenation of CH3OH

Bimetallic nickel/manganese phosphate-carbon nanofiber electrocatalyst for the oxidation of formaldehyde in alkaline medium

Facile synthesis of Ni/Fe3O4 derived from layered double hydroxides with high performance in the selective hydrogenation of benzaldehyde and furfural

Nanoporous Ni3P evolutionarily structured onto a Ni-foam for highly selective hydrogenation of dimethyl oxalate to methyl glycolate.

Bifunctional MoNi4/Nickel Foam Electro-Catalyst for Ultra-Efficient Oxidation of High-Concentration 5-Hydroxymethylfurfural and HER

Nickel - Titania Supported Catalysts for Direct Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 5-Methylfurfural

Novel Sol–gel‐derived Ag/SiO2–Al2O3 Catalysts for Highly Selective Oxidation of Methanol to Formaldehyde

Study on the Fe-Mo Catalyst for the Preparation of Formaldehyde by Methanol Oxidation

Mn/HZSM-5 catalyst with high content of Mn 4+ and surface hydroxyls for formaldehyde oxidation at room temperature

NiFe Layered Double Hydroxide-Derived Catalysts with Remarkable Selectivity for the Oxidation of 5-Hydroxymethylfurfural to 2,5-Furanedicarboxylic Acid under Base-Free Conditions