Abstract:To meet the ever-increasing energy demand, the development of effective, renewable, and environmentally friendly sources of alternative energy is imperative. Hydrogen (H2) is a renewable, clean energy carrier, which exhibits a threefold energy density compared to gasoline; H2 is considered one of the most promising alternative energy carriers for enabling a secure, clean energy future. However, the realization of a hydrogen economy is restricted by several unresolved issues. Particularly, one of the most difficult challenges is the development of a safe, efficient hydrogen storage and delivery system. To this end, hydrogen storage techniques based on liquid-phase chemical hydrogen storage materials have become an attractive choice. Formic acid (FA) with a high volumetric capacity of 53 g H2/L demonstrates promise as a safe, convenient liquid hydrogen carrier. However, generating H2 from FA in a controlled manner at ambient temperature is still challenging, which primarily depends on the catalyst used. Hence, for practical purposes, it is imperative to develop high-performance heterogeneous catalysts for the dehydrogenation of FA. Ultrasmall metal NPs with a high surface-to-volume ratio and "clean" surface, and hence a high density of active sites exposed to reactants, are of significance for heterogeneous catalysis. However, the size of these "clean" ultrasmall metal NPs inevitably increase, and these particles undergo aggregation during synthesis and catalysis because of their high surface energy. The immobilization of metal NPs into appropriate support materials affords considerable advantages for catalytic applications, which not only offers spatial confinement to control the nucleation and growth of particles, but also prevents them from aggregation; hence, catalytic performance is significantly enhanced. In addition, the functionalization of the support with electron-rich groups is beneficial to the formation of intermediates for FA dehydrogenation, which in turn promotes the catalytic performance. In this Account, studies of hydrogen generation from FA using heterogeneous catalysts were reviewed, mainly focusing on the results reported by our group. By varying support materials (metal-organic frameworks, silica, graphene, and porous carbons) and synthetic strategies, a wide range of highly active metal NP catalysts for efficient H2 generation from FA under mild conditions were developed. In addition, the design and synthetic strategies were described, by which the size and composition of the NPs, as well as the well-defined NPs-support interactions, can be controlled for the enhancement of catalytic performance for the FA dehydrogenation. Furthermore, the performance of the prepared catalysts for the effective release of H2 from FA for the purpose of liquid-phase chemical hydrogen storage was discussed. Finally, the challenges, expected improvements, and future opportunities in this research area were summarized.

Selective dehydrogenation of aqueous formic acid over multifunctional γ-Mo2N catalysts at a temperature lower than 100 ℃

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Formic acid enabled selectivity boosting in transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-furandimethanol on highly dispersed Co-N<sub><i>x</i></sub> sites

Formic Acid as a Bio-CO Carrier: Selective Dehydration with γ-Mo 2 N Catalysts at Low Temperatures

Chromic hydroxide-decorated palladium nanoparticles confined by amine-functionalized mesoporous silica for rapid dehydrogenation of formic acid

Enhanced Photocatalytic Dehydrogenation of Formic Acid over Ultrafine Electron-Deficient Pd Nanoparticles Immobilized on Amine-Functionalized Mesoporous Titanium Dioxide

Enhanced Activity of WO x -Promoted PdNi Nanoclusters Confined by Amino-Modified KIT-6 for Dehydrogenation of Additive-Free Formic Acid

Efficient hydrogen production from formic acid dehydrogenation over ultrasmall PdIr nanoparticles on amine-functionalized yolk-shell mesoporous silica

Green and efficient selective hydrogenation of furfural to furfuryl alcohol over hybrid CoOx/Nb2O5 nanocatalyst in water

AuPd Nanoparticles Anchored on Nitrogen-Decorated Carbon Nanosheets with Highly Efficient and Selective Catalysis for the Dehydrogenation of Formic Acid

Lewis Acidic VOx Engineered PdAu Nanocatalysts for Efficient Formic Acid Dehydrogenation

Promoted Hydrogen Generation from Formic Acid with Amines Using Au/ZrO2 Catalyst

Robust Hydrogen Production from Additive-Free Formic Acid via Mesoporous Silica-Confined Pd-ZrO 2 Nanoparticles at Room Temperature

Anchoring PdAu nanoclusters inside aminated metal-organic framework for fast dehydrogenation of formic acid

Ultrafine PdCo nanoparticles on amine-functionalized CeZrSBA-15 with short channels for efficient H 2 production from formic acid dehydrogenation

Metal-Nanoparticle-Catalyzed Hydrogen Generation from Formic Acid

PdCoNi nanoparticles supported on nitrogen-doped porous carbon nanosheets for room temperature dehydrogenation of formic acid

Bis-imidazolium Pd(0) based supported catalyst for the selective dehydrogenation of formic acid

Efficient Catalytic Hydrogenolysis of Glycerol Using Formic Acid As Hydrogen Source

Efficient Subnanometric Gold-Catalyzed Hydrogen Generation Via Formic Acid Decomposition under Ambient Conditions.

Nitrogen-phosphorus co-functionalized reduced graphene oxide supported NiCoPd-CeOx nanoparticles as a highly efficient and stable catalyst for formic acid dehydrogenation