Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

Organic Photovoltaics Printed via Sheet Electrospray Enabled by Quadrupole Electrodes

Efficient Non-Fullerene Organic Photovoltaics Printed by Electrospray Via Solvent Engineering.

Efficient Fully‐Sprayed Organic Solar Cells with Coffee‐Ring‐Free Photoactive Layer and Alloy Top‐Electrode

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Enhancement of the Performance of Organic Solar Cells by Electrospray Deposition with Optimal Solvent System

Green Printing for Scalable Organic Photovoltaic Modules by Controlling the Gradient Marangoni Flow

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Phase separation and domain crystallinity control enable open‐air‐printable highly efficient and sustainable organic photovoltaics

Spontaneous Vertical Phase Distribution of Multi-Acceptors System Enables High-Efficiency Organic Photovoltaics in Non-Halogenated Solvent and Large-Area Module Application

All Electrospray Printing of Carbon‐Based Cost‐Effective Perovskite Solar Cells

Perovskite Ink with an Ultrawide Processing Window for Efficient and Scalable Perovskite Solar Cells in Ambient Air.

Boosting Uniformity and Efficiency of Large‐Area Inverted Organic Photovoltaics Via ZnO Surface Energy Modulation

High-Performance Electron Transport Layer via Ultrasonic Spray Deposition for Commercialized Perovskite Solar Cells

Controlled Deposition and Performance Optimization of Perovskite Solar Cells Using Ultrasonic Spray‐Coating of Photoactive Layers

Air-Knife-Assisted Spray Coating of Organic Solar Cells

Vacuum‐Free, All‐Solution, and All‐Air Processed Organic Photovoltaics with over 11% Efficiency and Promoted Stability Using Layer‐by‐Layer Codoped Polymeric Electrodes

High Efficiency Organic Solar Cells with Spray Coated Active Layers Comprised of A Low Band Gap Conjugated Polymer

A Pseudo Planar Heterojunction Structure for Eco‐Friendly Printable Organic Solar Cells Achieving 19.05% Efficiency

Impact Deposition of a Single Droplet of Low‐Melting‐Point Alloy as the Top Electrode for Organic Photovoltaics

Printing and Coating Techniques for Scalable Organic Photovoltaic Fabrication

Effects of Damkhöler Number of Evaporation on the Morphology of Active Layer and the Performance of Organic Heterojunction Solar Cells Fabricated by Electrospray Method