Abstract:Flexible, lightweight, and large-area solar cells provide new power supply opportunities in the renewable energy field and facilitate the supply of power to internet-of-things devices and wearable devices. The choice of printing process technologies is a key parameter for such flexible power sources because of their energy-saving process technology and high throughput rate. In addition to selecting the appropriate printing method for the active and charge transport layers, the development of printed electrodes is critical. Numerous printable materials have been developed to replace conventional evaporated top electrodes. However, achieving fully solution-processed organic photovoltaics (OPVs) with power conversion efficiency (PCE) comparable to OPVs with vacuum-deposited transparent and top electrodes is challenging. This is because of the difficulty of forming a uniform interface between the top solution-processed electrode and the active layers while preventing deterioration. In this study, an electron transport layer-free, eutectic gallium–indium (EGaIn) top-cathode strategy was developed and a record PCE of 12.7% in fully solution-processed, flexible OPVs was achieved. Direct coating of EGaIn on the active layer, in a nitrogen atmosphere, is conducive for energy band matching and obtaining physically perfect interfaces without any penetrations or voids. An average PCE of 14.1% and enhanced operating stability, comparable to conventional OPVs, were achieved with indium tin oxide transparent electrodes by eliminating the electron-transport layer. The fully solution-processed flexible OPVs fabricated with the embedded silver nanowire strategy in ultrathin transparent polyimide, achieved an average PCE of 12.7%, representing a promising technique to meet green and high-throughput energy demands.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24235.Detailed performance of OPVs with different structures; detailed MPP operation stability and storage stability of OPVs with different structures; fabrication process of fully solution-processed OPVs; and characterizations of the transparent electrodes (PDF)This article has not yet been cited by other publications.

Efficient Non-Fullerene Organic Photovoltaics Printed by Electrospray Via Solvent Engineering.

Organic Photovoltaics Printed via Sheet Electrospray Enabled by Quadrupole Electrodes

Phase separation and domain crystallinity control enable open‐air‐printable highly efficient and sustainable organic photovoltaics

Enhancement of the Performance of Organic Solar Cells by Electrospray Deposition with Optimal Solvent System

Eco‐Compatible Solvent‐Processed Organic Photovoltaic Cells with Over 16% Efficiency

Balancing the Molecular Aggregation and Vertical Phase Separation in the Polymer: Nonfullerene Blend Films Enables 13.09% Efficiency of Organic Solar Cells with Inkjet‐Printed Active Layer

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Organic photovoltaic cell with 17% efficiency and superior processability

High-Efficiency All-Ambient Air, All-Solution and Low-Temperature Processed Nonfullerene Photovoltaics with Layer-by-Layer Co-Doped Polymeric Anodes

Releasing Acceptor from Donor Matrix to Accelerate Crystallization Kinetics with a Second Donor Toward High‐Efficiency Green‐Printable Organic Photovoltaics

Efficient Fully‐Sprayed Organic Solar Cells with Coffee‐Ring‐Free Photoactive Layer and Alloy Top‐Electrode

Vacuum‐Free, All‐Solution, and All‐Air Processed Organic Photovoltaics with over 11% Efficiency and Promoted Stability Using Layer‐by‐Layer Codoped Polymeric Electrodes

Toward High-Performance Organic Photovoltaics: the New Cooperation of Sequential Solution-Processing and Promising Non-Fullerene Acceptors

Volatile Solid‐Assisted Molecular Assembly Enables Eco‐Friendly Processed Organic Photovoltaic Cells with High Efficiency and Photostability

Constraining the Excessive Aggregation of Non-Fullerene Acceptor Molecules Enables Organic Solar Modules with the Efficiency >16

Balancing Solvent Polarity and Drying‐Kinetics for Processing Non‐Fullerene Acceptors towards High Performance Organic Solar Cells

Manipulating the Macroscopic and Microscopic Morphology of Large-Area Gravure-Printed ZnO Films for High-Performance Flexible Organic Solar Cells

Recent advances in non-fullerene organic photovoltaics enabled by green solvent processing

High Performance Thick‐Film Nonfullerene Organic Solar Cells with Efficiency over 10% and Active Layer Thickness of 600 Nm

Elimination of Drying‐Dependent Component Deviation Using a Composite Solvent Strategy Enables High‐Performance Inkjet‐Printed Organic Solar Cells with Efficiency Approaching 16%

Efficient Large Area Organic Solar Cells Processed by Blade-Coating With Single-Component Green Solvent