Abstract:Polyimide (PI) membranes with superior chemical resistance, insulation and self-extinguishing are attracting numerous attentions as the separators of lithium-ion batteries (LIBs), but significant challenges of low mechanical strength and poor electrolyte affinity still remain. Herein, a new kind of environmentally friendly hydrogen-bond (H-bond) cross-linked cellulose/carboxylated PI (Cellulose/PI-COOH) nanofiber composite separator is prepared via electrospinning followed by imidization and alkaline hydrolysis. Besides inheriting the high porosity of the pristine PI separator to absorb the electrolyte, the three-dimensional interconnected structure resulting from H-bond cross-linking is beneficial to improving the mechanical properties of the composite separator, and thereby delivers a tensile strength of 34.2 MPa, 5 times higher than that of the pristine PI separator (6.8 MPa). Meanwhile, the exposed hydroxyl groups on the cellulose, and carboxyl and imino groups on the carboxylated PI can also enhance the electrolyte affinity and wettability of the Cellulose/PI-COOH separator, which plays an important role in increasing the ionic conductivity (0.51 mS cm−1) and widening the electrochemical stability window (∼5.1 V). Consequently, compared with the polypropylene separator and PI separator, the H-bond cross-linked Cellulose/PI-COOH separators show better cycle performance and rate performance when adopted in lithium iron phosphate (LiFePO4) and lithium cobaltate (LiCoO2) half-cells. For example, the Cellulose/PI-COOH-based LiFePO4 half-cell demonstrates the highest initial discharge capacity of 166.2 mAh g−1 and capacity retention rate of 90%, much higher than the pristine PI-based LiFePO4 half-cell (114.6 mAh g−1, 86%). Furthermore, the much enhanced tensile strength, flexibility, thermal stability and flame-resistance of the Cellulose/PI-COOH separator are believed to greatly enhance the safety performance of the obtained LIBs.

Electrospun polyimide nanofiber‐based separators containing carboxyl groups for lithium‐ion batteries

Carboxylated Polyimide Separator with Excellent Lithium Ion Transport Properties for a High-Power Density Lithium-Ion Battery

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Progress in polymeric separators for lithium ion batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries

Electrospun nanofiber separator derived from nano-SiO2-modified polyimide with superior mechanical flexibility for high-performance lithium-ion battery

Electrospun polyimide@organic-montmorillonite composite separator with enhanced mechanical and thermal performances for high-safety lithium-ion battery

Cross-linked cellulose/carboxylated polyimide nanofiber separator for lithium-ion battery application

Engineering of electrospun polyimide separators for electrical double-layer capacitors and lithium-ion cells

Thermotolerant separator of cross-linked polyimide fibers with narrowed pore size for lithium-ion batteries

High safety and electrochemical performance electrospun para-aramid nanofiber composite separator for lithium-ion battery

Electrolyte-philic and thermal-resistant polyimide separator enhances the performance of flexible silicon/carbon nanofibers for lithium-ion batteries

Sulfophenylated Poly (ether Ether Ketone Ketone) Nanofiber Composite Separator with Excellent Electrochemical Performance and Dimensional Thermal Stability for Lithium‐Ion Battery Via Electrospinning

Robust, High-Temperature-Resistant Polyimide Separators with Vertically Aligned Uniform Nanochannels for High-Performance Lithium-Ion Batteries

A Nano-Silica Modified Polyimide Nanofiber Separator with Enhanced Thermal and Wetting Properties for High Safety Lithium-Ion Batteries

Lithium ion battery separator with improved performance via side-by-side bicomponent electrospinning of PVDF-HFP/PI followed by 3D thermal crosslinking

Electrochemical performance and thermal property of electrospun PPESK/PVDF/PPESK composite separator for lithium-ion battery

WO3-composited polyimide nanofibrous separator with superior mechanical properties and high capacity for lithium-ion batteries

H-Bond Cross-Linked Polyimide Nanofiber-Modified Polyethylene Composite Separators for Lithium-Ion Batteries