Abstract:Polyimide (PI) membranes with superior chemical resistance, insulation and self-extinguishing are attracting numerous attentions as the separators of lithium-ion batteries (LIBs), but significant challenges of low mechanical strength and poor electrolyte affinity still remain. Herein, a new kind of environmentally friendly hydrogen-bond (H-bond) cross-linked cellulose/carboxylated PI (Cellulose/PI-COOH) nanofiber composite separator is prepared via electrospinning followed by imidization and alkaline hydrolysis. Besides inheriting the high porosity of the pristine PI separator to absorb the electrolyte, the three-dimensional interconnected structure resulting from H-bond cross-linking is beneficial to improving the mechanical properties of the composite separator, and thereby delivers a tensile strength of 34.2 MPa, 5 times higher than that of the pristine PI separator (6.8 MPa). Meanwhile, the exposed hydroxyl groups on the cellulose, and carboxyl and imino groups on the carboxylated PI can also enhance the electrolyte affinity and wettability of the Cellulose/PI-COOH separator, which plays an important role in increasing the ionic conductivity (0.51 mS cm−1) and widening the electrochemical stability window (∼5.1 V). Consequently, compared with the polypropylene separator and PI separator, the H-bond cross-linked Cellulose/PI-COOH separators show better cycle performance and rate performance when adopted in lithium iron phosphate (LiFePO4) and lithium cobaltate (LiCoO2) half-cells. For example, the Cellulose/PI-COOH-based LiFePO4 half-cell demonstrates the highest initial discharge capacity of 166.2 mAh g−1 and capacity retention rate of 90%, much higher than the pristine PI-based LiFePO4 half-cell (114.6 mAh g−1, 86%). Furthermore, the much enhanced tensile strength, flexibility, thermal stability and flame-resistance of the Cellulose/PI-COOH separator are believed to greatly enhance the safety performance of the obtained LIBs.

WO3-composited polyimide nanofibrous separator with superior mechanical properties and high capacity for lithium-ion batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Progress in polymeric separators for lithium ion batteries

Copolymer-assisted Polypropylene Separator for Fast and Uniform Lithium Ion Transport in Lithium-ion Batteries

In situ aluminide armored polyimide nanofiber separators with ultrahigh strength and high wettability for advanced lithium-ion batteries

Thermotolerant separator of cross-linked polyimide fibers with narrowed pore size for lithium-ion batteries

Electrospun nanofiber separator derived from nano-SiO2-modified polyimide with superior mechanical flexibility for high-performance lithium-ion battery

Hierarchical three-dimensional micro/nano-architecture of polyaniline nanowires wrapped-on polyimide nanofibers for high performance lithium-ion battery separators

Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries

Zwitterion grafted polyimide separator for improving lithium-ion transport and its application in LiCoO 2 batteries

Preparation of PEI-modified PI separators for advanced lithium ion batteries

Ultra-robust polyimide nanofiber separators with shutdown function for advanced lithium-ion batteries

Graphite oxide dopping polyimide nanofiber membrane via electrospinning for high performance lithium-ion batteries

Robust, High-Temperature-Resistant Polyimide Separators with Vertically Aligned Uniform Nanochannels for High-Performance Lithium-Ion Batteries

Electrospun polyimide@organic-montmorillonite composite separator with enhanced mechanical and thermal performances for high-safety lithium-ion battery

Porous, Robust, Thermal Stable, and Flame Retardant Nanocellu-lose/Polyimide Separators for Safe Lithium-Ion Batteries

Cross-linked cellulose/carboxylated polyimide nanofiber separator for lithium-ion battery application

Halloysite nanotubes enhanced polyimide/oxidized-lignin nanofiber separators for long-cycling lithium metal batteries

A Nano-Silica Modified Polyimide Nanofiber Separator with Enhanced Thermal and Wetting Properties for High Safety Lithium-Ion Batteries

Semi‐Interpenetrating Polymer Electrolyte As a Coating Layer Constructed on Polyphenylene Sulfide Nonwoven to Afford Superior Stability and Performance for Lithium‐Ion Batteries