Abstract:The separators play a crucial role in ensuring the safety of lithium batteries and greatly affect the electrochemical performance of the battery. However, the weak thermal stability and non-polar surface of commercial polyolefin separators severely restrict the development of the high-performance lithium batteries. In this work, we initially proposed polyamide acid (PAA) nanofiber separator with three monomers through a two-step synthesis method, which was prepared by electrospinning. By controlling different processing temperatures, PAA separators containing different amount of carboxyl groups were obtained. PAA separator had better wettability and thermal stability than PE separator. Meanwhile, the electrospinning method brings ultra-high porosity (95.3 %) to the membrane, resulting a much higher electrolyte absorption and retention rate of PAA (initially 3214 %, 240 % at 50 min) compared to PE separator. In particular, carboxyl groups serve as functional groups to provide an electronegative atmosphere, promoting the transport of lithium ion between the anode and cathode, and playing an important role in improving ionic conductivity. Consequently, batteries with PAA-SOH-50 separator showed the best rate charging/discharging performance, maintaining 87.7 % and 73.6 % of its initial capacity at 2.0 C. Moreover, cells with PAA separator exhibited much higher initial discharge capacity (164.3 mAh g-1) than that with PE separator (126.8 mAh g-1). After 100 cycles at 0.5 C, the PAA nanofiber separator achieved an ultralow attenuation rate of only 0.04 % per cycle, which was less than half of the commercial PE separator (0.10 % per cycle). This work provides a new vision for the development of separator materials, revealing the great influence of functional groups, such as carboxyl groups, on the performance of separators, which provides a strong basis for the further research of high-performance separators.

Graphite oxide dopping polyimide nanofiber membrane via electrospinning for high performance lithium-ion batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

A novel high-performance electrospun of polyimide/lignin nanofibers with unique electrochemical properties and its application as lithium-ion batteries separators

Electrospun Polyimide Nanofiber Separators For Lithium-Ion Batteries

Lithium Ion Battery Separator with High Performance and High Safety Enabled by Tri-Layered SiO2@PI/m-PE/SiO2@PI Nanofiber Composite Membrane

A Novel Hot-Pressed Electrospun Polyimide Separator for Lithium-Sulfur Batteries

Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries

A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator

A Nano-Silica Modified Polyimide Nanofiber Separator with Enhanced Thermal and Wetting Properties for High Safety Lithium-Ion Batteries

Fibrous Separator with Surface Modification and Micro-Nano Fibers Lamination Enabling Fast Ion Transport for Lithium-Ion Batteries

Multilayer Nanofiber Composite Separator for Lithium-Ion Batteries with High Safety

Electrospun High-Thermal-Resistant Inorganic Composite Nonwoven as Lithium-Ion Battery Separator

WO 3 -Composited Polyimide Nanofibrous Separator with Superior Mechanical Properties and High Capacity for Lithium-Ion Batteries

Polyethylene Oxide-Coated Electrospun Polyimide Fibrous Seperator for High-Performance Lithium-Ion Battery

WO3-composited polyimide nanofibrous separator with superior mechanical properties and high capacity for lithium-ion batteries

A Heat-Resistant Silica Nanoparticle Enhanced Polysulfonamide Nonwoven Separator for High-Performance Lithium Ion Battery

A High-Safety Pvdf/Al2o3 Composite Separator for Li-Ion Batteries Via Tip-Induced Electrospinning and Dip-Coating

Tri-Monomer Polyamide Acid Nanofiber Separator for Safe and High Performance Lithium-Ion Batteries

Great Potentials of Lignin-Based Separator for Li-ion Battery with Electrospinning in Aqueous System

High-stability core-shell structured PAN/PVDF nanofiber separator with excellent lithium-ion transport property for lithium-based battery

A novel bi-functional double-layer rGO–PVDF/PVDF composite nanofiber membrane separator with enhanced thermal stability and effective polysulfide inhibition for high-performance lithium–sulfur batteries