Abstract:Polyimide (PI) membranes with superior chemical resistance, insulation and self-extinguishing are attracting numerous attentions as the separators of lithium-ion batteries (LIBs), but significant challenges of low mechanical strength and poor electrolyte affinity still remain. Herein, a new kind of environmentally friendly hydrogen-bond (H-bond) cross-linked cellulose/carboxylated PI (Cellulose/PI-COOH) nanofiber composite separator is prepared via electrospinning followed by imidization and alkaline hydrolysis. Besides inheriting the high porosity of the pristine PI separator to absorb the electrolyte, the three-dimensional interconnected structure resulting from H-bond cross-linking is beneficial to improving the mechanical properties of the composite separator, and thereby delivers a tensile strength of 34.2 MPa, 5 times higher than that of the pristine PI separator (6.8 MPa). Meanwhile, the exposed hydroxyl groups on the cellulose, and carboxyl and imino groups on the carboxylated PI can also enhance the electrolyte affinity and wettability of the Cellulose/PI-COOH separator, which plays an important role in increasing the ionic conductivity (0.51 mS cm−1) and widening the electrochemical stability window (∼5.1 V). Consequently, compared with the polypropylene separator and PI separator, the H-bond cross-linked Cellulose/PI-COOH separators show better cycle performance and rate performance when adopted in lithium iron phosphate (LiFePO4) and lithium cobaltate (LiCoO2) half-cells. For example, the Cellulose/PI-COOH-based LiFePO4 half-cell demonstrates the highest initial discharge capacity of 166.2 mAh g−1 and capacity retention rate of 90%, much higher than the pristine PI-based LiFePO4 half-cell (114.6 mAh g−1, 86%). Furthermore, the much enhanced tensile strength, flexibility, thermal stability and flame-resistance of the Cellulose/PI-COOH separator are believed to greatly enhance the safety performance of the obtained LIBs.

A Separator with a Novel Thermal Crosslinking Structure Based on Electrospun PI/A‐POSS for Lithium‐Ion Battery with High Safety and Outstanding Electrochemical Performance

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Designing polyimide/polyacrylonitrile/polyimide sandwich composite separator for rechargeable lithium-ion batteries

A Sandwich-Structure Composite Membrane as Separator with High Wettability and Thermal Properties for Advanced Lithium-Ion Batteries

A Nano-Silica Modified Polyimide Nanofiber Separator with Enhanced Thermal and Wetting Properties for High Safety Lithium-Ion Batteries

Graphite oxide dopping polyimide nanofiber membrane via electrospinning for high performance lithium-ion batteries

Preparation of thermally conductive polyimide/aluminum oxide/boehmite composite separators for enhancing lithium‐ion battery safety and performance

Thermally stable 3D cross-linked fluorinated polyimide/PVDF-HFP hybrid separator for lithium battery applications

Dual‐Modified Electrospun Fiber Membrane as Separator with Excellent Safety Performance and High Operating Temperature for Lithium‐Ion Batteries

Cross-linked cellulose/carboxylated polyimide nanofiber separator for lithium-ion battery application

Electrospun polyimide@organic-montmorillonite composite separator with enhanced mechanical and thermal performances for high-safety lithium-ion battery

A dendrite-blocking polyimide- meta -aramid separator with ultrahigh strength and thermostability for high-security lithium-ion battery

An upgraded polymeric composite with interparticle chemical bonding microstructure toward lithium-ion battery separators with enhanced safety and electrochemical performances

A Thermally Stable, Combustion‐Resistant, and Highly Ion‐Conductive Separator for Lithium‐Ion Batteries Based on Electrospun Fiber Mats of Crosslinked Polybenzoxazine

Thermotolerant separator of cross-linked polyimide fibers with narrowed pore size for lithium-ion batteries

Multilayer Nanofiber Composite Separator for Lithium-Ion Batteries with High Safety

Zwitterion grafted polyimide separator for improving lithium-ion transport and its application in LiCoO 2 batteries

Semi‐Interpenetrating Polymer Electrolyte As a Coating Layer Constructed on Polyphenylene Sulfide Nonwoven to Afford Superior Stability and Performance for Lithium‐Ion Batteries

Evaluation of asymmetric poly(vinylidene fluoride)-coated polyimide separator with three-dimensionally homogeneous microporous structure for high-safety lithium-ion battery

Crystalline Al2O3 modified porous poly(aryl ether ketone) (PAEK) composite separators for high performance lithium-ion batteries via an electrospinning technique