Abstract:Polyimide (PI) membranes with superior chemical resistance, insulation and self-extinguishing are attracting numerous attentions as the separators of lithium-ion batteries (LIBs), but significant challenges of low mechanical strength and poor electrolyte affinity still remain. Herein, a new kind of environmentally friendly hydrogen-bond (H-bond) cross-linked cellulose/carboxylated PI (Cellulose/PI-COOH) nanofiber composite separator is prepared via electrospinning followed by imidization and alkaline hydrolysis. Besides inheriting the high porosity of the pristine PI separator to absorb the electrolyte, the three-dimensional interconnected structure resulting from H-bond cross-linking is beneficial to improving the mechanical properties of the composite separator, and thereby delivers a tensile strength of 34.2 MPa, 5 times higher than that of the pristine PI separator (6.8 MPa). Meanwhile, the exposed hydroxyl groups on the cellulose, and carboxyl and imino groups on the carboxylated PI can also enhance the electrolyte affinity and wettability of the Cellulose/PI-COOH separator, which plays an important role in increasing the ionic conductivity (0.51 mS cm−1) and widening the electrochemical stability window (∼5.1 V). Consequently, compared with the polypropylene separator and PI separator, the H-bond cross-linked Cellulose/PI-COOH separators show better cycle performance and rate performance when adopted in lithium iron phosphate (LiFePO4) and lithium cobaltate (LiCoO2) half-cells. For example, the Cellulose/PI-COOH-based LiFePO4 half-cell demonstrates the highest initial discharge capacity of 166.2 mAh g−1 and capacity retention rate of 90%, much higher than the pristine PI-based LiFePO4 half-cell (114.6 mAh g−1, 86%). Furthermore, the much enhanced tensile strength, flexibility, thermal stability and flame-resistance of the Cellulose/PI-COOH separator are believed to greatly enhance the safety performance of the obtained LIBs.

Engineering of electrospun polyimide separators for electrical double-layer capacitors and lithium-ion cells

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries

Electrospun nanofiber separator derived from nano-SiO2-modified polyimide with superior mechanical flexibility for high-performance lithium-ion battery

Thermotolerant separator of cross-linked polyimide fibers with narrowed pore size for lithium-ion batteries

Electrospun polyimide@organic-montmorillonite composite separator with enhanced mechanical and thermal performances for high-safety lithium-ion battery

Electrochemical Characteristics of Elastic, Non-Polar Polyurethane-Based Polymer Gel Electrolyte for Separator-Less Lithium-Ion Batteries

Electrospun polyimide nanofiber‐based separators containing carboxyl groups for lithium‐ion batteries

Polyethylene Oxide-Coated Electrospun Polyimide Fibrous Seperator for High-Performance Lithium-Ion Battery

Cross-linked cellulose/carboxylated polyimide nanofiber separator for lithium-ion battery application

Preparation of PEI-modified PI separators for advanced lithium ion batteries

H-Bond Cross-Linked Polyimide Nanofiber-Modified Polyethylene Composite Separators for Lithium-Ion Batteries

Facile Fabrication of Regenerated Cellulose-Based Separators for High-Performance Lithium-Ion Batteries by Regulating Degrees of Polymerization

Design of polyimide-based separators for effective suppression of self-discharge in non-aqueous electrical double layer capacitors

Polyimide separators for rechargeable batteries

Lithium ion battery separator with improved performance via side-by-side bicomponent electrospinning of PVDF-HFP/PI followed by 3D thermal crosslinking

Porous, Robust, Thermal Stable, and Flame Retardant Nanocellu-lose/Polyimide Separators for Safe Lithium-Ion Batteries

Designing polyimide/polyacrylonitrile/polyimide sandwich composite separator for rechargeable lithium-ion batteries

Polyimide Binder by Combining with Polyimide Separator for Enhancing the Electrochemical Performance of Lithium Ion Batteries

Covalent Organic Framework-Coated Polyimide Ion-Track-Etched Separator with High Thermal Stability for Developing Lithium-Ion Batteries with Long Lifespans