Abstract:Here, a novel PVDF-HFP/PI side-by-side bicomponent electrospun separator with cross-linked structure is successfully fabricated for lithium-ion batteries (LIBs). The bicomponent composite fiber not only integrates the excellent characteristics of PVDF-HFP and PI, but also improves the mechanical strength of the electrospun nonwoven and maintains a high level of porosity, up to 85.9 %. Moreover, the PVDF-HFP/PI(T) fibrous separator emerges outstanding performance, including the thermal dimensional stability (up to 200 °C), self-extinguishment, high electrolyte uptake (483.5 %), good ionic conductivity (1.78 × 10−3 S/cm), wide electrochemical stability window (up to 4.94 V vs. Li+/Li) and favorable interface structure. It is further confirmed by the 3D simulation that the PVDF-HFP/PI(T) nonwoven using as the LIBs separator is beneficial to the homogeneous transmission of lithium ions. As a result, the coin cells with PVDF-HFP/PI(T) separator possess the best first discharge capacity (120.41 mAh g−1) and coulombic efficiency (99.36 %) with respect to that of Celgard2320 separator and cross-electrospun PVDF-HFP + PI(T) separator. After 50 cycles, the discharge capacity of Li/PVDF-HFP/PI(T)/LiFePO4 is found to be retained around 98.13 %, which is higher than 94.91 % of Celgard2320 separator and 96.09 % of cross-electrospun PVDF-HFP + PI(T) separator. Moreover, the coin cell using the PVDF-HFP/PI (T) separator exhibited good discharge capacity under different discharge C-rate at 45 °C, indicating its potential for the high-temperature safety of LIBs. In sum, the PVDF-HFP/PI(T) nonwoven with excellent property has an application prospect in the field of LIBs separator, which also provides a reliable strategy for designing the electrospun separator with improved performance.

Electrochemical performance and thermal property of electrospun PPESK/PVDF/PPESK composite separator for lithium-ion battery

A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator

Fabrication of Diatomite/polyethylene Terephthalate Composite Separator for Lithium-Ion Battery

A high-strength electrospun PPESK fibrous membrane for lithium-ion battery separator

Enhanced Mechanical Behavior and Electrochemical Performance of Composite Separator by Constructing Crosslinked Polymer Electrolyte Networks on Polyphenylene Sulfide Nonwoven Surface

Electrospun High-Thermal-Resistant Inorganic Composite Nonwoven as Lithium-Ion Battery Separator

Preparation and Performance of Silica/polypropylene Composite Separator for Lithium-Ion Batteries

Effect of Silica/Polyvinyl Alcohol Porous Layers on Performance of Polypropylene Separators for Lithium ion Batteries

Electrochemical Performance and Thermal Stability of the Electrospun PTFE Nanofiber Separator for Lithium‐ion Batteries

Crystalline Al2O3 modified porous poly(aryl ether ketone) (PAEK) composite separators for high performance lithium-ion batteries via an electrospinning technique

Effect of thermal processing conditions on the structure and properties of porous PENK/PVDF composite films and its application as lithium-ions separators

Improved performance of PVdF-HFP/PI nanofiber membrane for lithium ion battery separator prepared by a bicomponent cross-electrospinning method

Electrospun polyimide@organic-montmorillonite composite separator with enhanced mechanical and thermal performances for high-safety lithium-ion battery

Fabrication electro-spun Poly(vinyl alcohol)-Melamine nonwoven membrane composite separator for high-power lithium-ion batteries

Electrospun PAN/cellulose composite separator for high performance lithium-ion battery

Electrospun PVDF-HFP/PAN bicomponent nanofibers as separators in lithium-ion batteries with high thermal stability and electrolyte wettability

Lithium ion battery separator with improved performance via side-by-side bicomponent electrospinning of PVDF-HFP/PI followed by 3D thermal crosslinking

Effect of Silica Nanoparticles/Poly(Vinylidene Fluoride-Hexafluoropropylene) Coated Layers on the Performance of Polypropylene Separator for Lithium-Ion Batteries

Electrospun polyimide nanofiber‐based separators containing carboxyl groups for lithium‐ion batteries

Designing polyimide/polyacrylonitrile/polyimide sandwich composite separator for rechargeable lithium-ion batteries

Electrospun PVDF-Based Polymers for Lithium-Ion Battery Separators: A Review