Abstract:High‑silicon iron ore tailings (IOTs) as mineral solid wastes derived from the processing and utilization of iron ore, which would threaten human health and the ecological environment if handled improperly. Coincidently, it consists of abundant quartz gangue. In this study, we proposed a superconducting high gradient magnetic separation (S-HGMS) coupling with acid leaching technology to prepare high-grade silica from high‑silicon IOTs. S-HGMS was applied to high‑silicon IOTs to pre-concentrate silica into quartz concentrate. Under the optimized conditions, the SiO2 grade in quartz concentrate reached 92.06% with a SiO2 recovery of 43.54%. The results indicate that the S-HGMS effectively achieved a selective separation of silica from high‑silicon IOTs, but entrainment occurred between silica and sub-micron impurities particles, reducing the SiO2 grade and recovery. Quartz concentrate was then subjected to a mixed acid leaching to remove metallic impurities. Under the conditions of the ratio of mixed acid of 5 mol/L HCl + 1 mol/L HF, leaching temperature of 353.15 K, and leaching time of 12 h, the SiO2 purity of high-grade silica reached 99.51%, and the removal efficiency of Fe, Al, Mg, and Ca from quartz concentrate was 95.20%, 85.60%, 97.99%, and 97.19%, respectively. During the leaching process, HF played a vital role and its' nucleophilic attack can provide the effective removal of metallic impurities. The dissolution behaviors of Fe, Al, Mg, and Ca were described as shrinking core models, but their controlled steps were significantly different. Thermodynamic results indicate that Fe, Al, Mg, and Ca leaching processes were dominated by ΔS 0 rather than ΔH 0, and their ΔG 0 from lowest to highest were Δ G 0 Ca < Δ G 0 Mg < Δ G 0 Fe < Δ G 0 Al < 0 , indicating that Ca ion may be leached more easily. Ultimately, a prospect was proposed for the high-value application of high‑silicon IOTs resource. This study provides valuable insight to realize the recycling and utilization of tailings for its industrialization.

Hydrogen generation during the purification of metallurgical-grade silicon

Efficient Recovery of Silicon from Silicon Slag by Interface Modification Combined with Flotation

Recovery and Purification of Metallic Silicon from Waste Silicon Slag in Electromagnetic Induction Furnace by Slag Refining Method

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Effect of Grinding Liberation on Recovery of Silicon from MG-Si Waste Slag by Flotation

Purification of Organosilicon Waste Silicon Powder with Hydrometallurgy

Enhancing removal of hydrogen from granular polysilicon by innovating vacuum separation model and method for SoG-Si

Understanding reactions between water and steelmaking slags: Iron distribution, hydrogen generation, and phase transformations

Separating and Recycling of Elemental Silicon from Wasted Industrial Silicon Slag

Local high concentration alkali field accelerated silicon hydrolysis for hydrogen production

Recycling of carbonized rice husk for producing high purity silicon by the combination of electric arc smelting and slag refining

Improving flotation separation of micro Si/SiC particles from silicon sawing waste by surface hydrophilic modification

Nano‐Si for On‐Demand H2 Production: Optimization of Yield and Real‐Time Visualization of Si─H2O Reaction Using Liquid‐Phase Transmission Electron Microscopy

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Separation and purification of silicon from cutting kerf-loss slurry waste by electromagnetic and slag treatment technology

Recovery and preparation of high-grade silica from iron ore tailings by S-HGMS coupling with acid leaching technology: Description of separation mechanism and leaching kinetics

Comparative study on removal of metallurgical silicon impurities by different acid leaching methods

Oxygen removal and silicon recovery from polycrystalline silicon kerf loss by combining vacuum magnesium thermal reduction and hydrochloric acid leaching

Study on the Separation and Sedimentation Performance of Silicon from Diamond Wire Saw Silicon Powder Slurry

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Enhancing the separation of Fe/Al/Ca impurities from metallurgical silicon to purify by slagging-directional solidification