Abstract:Summary form only given. The cathode spot (CS), as an intense source of inter-electrode arc plasma, plays a predominant role in maintaining the burning of vacuum arc, especially with an inactive anode. Consequently, the dynamics of CSs have a significant influence on the characteristics of the vacuum arc. Many experimental investigations have been devoted to better understanding of the motion of CSs, especially the initial expansion process of cathodes spots in high-current triggered vacuum arc. It has been indicated that the motion characteristic of cathode spots is greatly influenced by external axial magnetic field (AMF). In this work, a method is established to simulate the initial expansion process of CSs in high-current triggered vacuum arc, based on the proposed stepwise model of the motion of a single CS 1 . In this method, every new CS can be ignited in any direction around the old one with certain probability, which is connected with the magnetic field around the position of the old CS. With this approach, the initial expansion processes of CSs in free-burning and AMF-stabilized high-current triggered vacuum arc are simulated numerically with CSs initially uniformly distributed on a ring. The self-generated transverse magnetic field at the position of every CS is calculated by commercial software ANSYS with the current distribution in contact plate taken into account 2 . Simulation results agree well with relevant experiment results. Simulation results show that CSs expand faster without external AMF than that under AMF, and external AMF has significant influence on the distribution of CSs on the cathode surface, e.g., more and more CSs appear inside the ring when external AMF is present. Furthermore, the results also indicate that the expanding ring structure of CSs is unstable, and AMF can accelerate the breaking of the ring.

Regenerative Soot: A cusp field, graphite hollow cathode, carbon cluster ion source

Regenerative Soot-II: Emission of carbon clusters from sooting plasma

Regenerative Soot-V: Spectroscopy of the regenerative sooting discharges

Regenerative Soot-IV: The state of the carbon vapour in the regenerative sooting discharge

Transition from the C3-dominated discharge to the sooting plasma

Regenerative Soot-VIII: Sputtering and formation of C1 and C2

Regenerative Soot-III: Role of the kinetic and potential sputtering in the regeneration of the soot

A Distributed Carbon Cathodic Vacuum Arc

Cs+ sputtered clusters from multi-walled carbon nanotubes and graphite

Fullerene and Nanoparticle Formation in Carbon Cathodic Arc Deposition

Design And Machining Of The 15-20ma H-Cusp Source

Hollow cathode effect modified time-dependent global model and high-power impulse magnetron sputtering discharge and transport in cylindrical cathode

Carbon films for use as the electron source in a parallel e-beam lithography system

Amorphous carbon films in direct current magnetron sputtering from regenerative sooting discharge

H- cusp source development for 100 MeV compact cyclotron at China Institute of Atomic Energy

Observation of Thermal Cathodic Hot Spots in a Magnetically Rotating Arc Plasma Generator

3D Particle‐in‐cell Simulation of Positive Streamer Initiation in Highly Pressurized Gaseous, Liquid and Supercritical CO 2 with Field Ionization

Numerical Simulation of the Initial Expansion Process of Cathode Spots in High-Current Triggered Vacuum Arc

The Modification at CSNS Ion Source

Dynamic Evolution of CS and Its Effects on Charged Particles in Vacuum Arc

Field Ionization Using Densely Spaced Arrays of Nickel-Tipped Carbon Nanotubes