Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

The Modification at CSNS Ion Source

The Improvements at CSNS Ion Source

The operation and improvement of CSNS front end

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

RF H-Minus Ion Source Development in China Spallation Neutron Source

Upgrade of the Extraction System of Permanent Magnet Electron Cyclotron Resonance Ion Source

The beam commissioning of a CW high charge state heavy ion RFQ

2X scaled Penning source developments

Upgrading of Ion Source for NEC Compact AMS

Commissioning and operation of the transverse collimation system at the RCS of CSNS

China spallation neutron source design∗

Development of the double spoke cavity prototype for CSNS-II

Preliminary Design of CSNS-II Linac SRF LLRF

Practical 2.45-Ghz Microwave-Driven Cs-free H − Ion Source Developed at Peking University

Commissioning the Photoinjector of a Gamma-Ray Light Source

Prototype of repetitive pulsed power supply for the RCS beam extraction kicker in the CSNS upgrade

The construction of the inner ion source for SC200 compact superconducting cyclotron

rf improvements for Spallation Neutron Source H- ion source

Beam characterization measurement of a duoplasmatron ion source for the Nanjing Proton Source

Plasma Impedance Measurement of Uncesiated RF-driven Negative Hydrogen Ion Source in CSNS

Construction of External Antenna RF H-minus Source in CSNS