Abstract:Abstract An H - ion source is being operated at the new 160 MeV linear injector (Linac4) of the CERN accelerator complex. The source’s plasma is of the Radio Frequency Inductively Coupled Plasma type (RF-ICP), without magnetic cusp and runs with Cs-loss compensation [1]. Vertical downward oriented filter- and electron dump-dipolar magnetic fields expand over the plasma chamber, beam-formation, beam-extraction and electron dump regions and generate horizontal asymmetry and beam angular deflection partially compensated by mechanical alignment of the front-end. The H - beam is generated via volume and caesiated plasma surface modes, the latter inducing a radial asymmetry characterized by an increased current density close to the plasma electrode surface [2]. Asymmetries affecting the meniscus shape, or its current density have to be simulated via 3D Particle In Cell Monte Carlo (PIC-MC) solvers, such as the Orsay Negative Ion eXtraction code (ONIX) [3]. Validation of these simulations require dedicated measurements. This contribution describes experimental methods newly implemented at CERN’s ion source test stand and initial results for Optical and Beam Emission Spectroscopy (OES, BES), emittance and beam profile measurements. In a later stage, the gathered data sets can be compared to source plasma parameters and extracted beam parameters from PIC-MC simulations, once coupled to the Ion Beam Simulation (IBSimu) [4] beam transport code. The experimental parameter space includes RF-power, density of neutrals, position of the RF coil and extraction field. Beams of H - , D - and protons were produced; examples of measured data are presented in this contribution.

Beam characterization measurement of a duoplasmatron ion source for the Nanjing Proton Source

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

Design and Optimization Study of a Duoplasmatron Ion Source for High-Intensity Proton Beam

Methods to obtain high intensity proton ion beams with low emittance from ECR ion source at Peking university

A 2.45 Ghz Electron Cyclotron Resonance Proton Ion Source and A Dual-Lens Low Energy Beam Transport

A New Proton Injector Based on PKU-type 2.45ghz PMECR Ion Source for BNCT Facility

Study on Proton Fraction of Beams Extracted from Electron Cyclotron Resonance Ion Source

The R&D progress of 4 MW EAST-NBI high current ion source

Upgrade of the Extraction System of Permanent Magnet Electron Cyclotron Resonance Ion Source

High current H2(+) and H3(+) beam generation by pulsed 2.45 GHz electron cyclotron resonance ion source.

An experimental investigation of the proton fraction in a three electrode 2.45 GHz ECR ion source

Beam Formation Studies on the CERN IS03b H Source

Intense Beams from Gases Generated by A Permanent Magnet Ecr Ion Source at Pku

Optimization of transverse emittance for RF-driven negative hydrogen ion source developed at China Spallation Neutron Source

R&D Progress of High Power Ion Source on EAST-NBI

Measurement of Emittance at CSNS Ion Source Without Analyzing Magnet

Emittance Measurements of High-Current Pulse Ion Beam

Beam Experiments with A Non-Intercepting Beam Induced Fluorescence Profile Monitor for the Ads Linac

Beam Commissioning for a Superconducting Proton Linac

Emittance Measurement along Transport Beam Line for Laser Driven Protons

Design and beam dynamics simulation of an 8 MeV compact accelerator-driven neutron source