Abstract:In the end milling of superalloy honeycomb cores, the contact form between the cutting tool and honeycomb wall and the force state of the honeycomb wall are variable, there will be difficulties in chip removal. The irregular extension of transverse tearing burrs can deteriorate the machining quality of honeycomb core surfaces, thereby adversely affecting the assembly and service performance of sandwich structures. Based on kinematic analysis, modeling of the removal and deflection process of honeycomb walls was conducted. The feed entrance angle in the case of machining thin walls with high feed speeds was characterized, and the force state of the honeycomb wall and the degree of shear or compression it bears were analyzed. Analytical models of damage scale and single-tooth cutting state were established under different feed entrance angles. The impact of feed entrance angle on the minimum burr length and the minimum constraint failure width was analyzed. The milling experiments of GH4099 superalloy honeycomb wall with ice filling constraint were designed and conducted to clarify the influence of different feed entrance angles on cutting force and transverse tearing burr length. The morphology of burrs and the wear form of the cutting tool were analyzed, and the formation mechanism of transverse tearing burr on the honeycomb sidewalls was revealed. The research results indicate that the feed force F x is 2.1 to 4.7 times greater than the main force F y or the back force F z . When the feed entrance angle is less than 90°, transverse tearing burrs either do not occur, or occur crimped burrs that are gradually removed. Particularly within the range of 0° to 30°, the machining quality is better. The cutting force has a significant shearing effect on the honeycomb wall, making it susceptible to plastic deformation and reaching the fracture strain. The cutting edge can effectively remove material from the honeycomb wall, resulting in normal wear on the minor flank face and tip of the cutting tool. When the feed entrance angle is greater than 90°, it is easy to form large banded burrs, and the burr length is relatively similar to about 1500μm. The cutting force has a significant extrusion effect on the honeycomb wall, resulting in minimal deflection deformation of the honeycomb wall, and making it difficult to fracture. The cutting tool fails to perform effective cutting, leading to increased friction between the cutting tool and honeycomb wall, which continuously induces irregular extension of the burrs. The research findings are of great significance for achieving damage control in metal honeycomb core machining and guiding process and clamping optimization.

Influence of cell size effect on the vertical cutting of hexagonal thin-walled honeycombs by parallel blades

Influence of feed entrance angle on transverse tearing burr formation in the milling of superalloy honeycomb with ice filling constraint

Instantaneous cutting force model considering the material structural characteristics and dynamic variations in the entry and exit angles during end milling of the aluminum honeycomb core

Study on the Cutting Force in Machining of Aluminum Honeycomb Core Material

Experimental and Numerical Studies on Aluminum Honeycomb with Various Cell Specifications under Impact Loading

Cutting Force Prediction and Experiment Verification of Paper Honeycomb Materials by Ultrasonic Vibration-Assisted Machining

Energy absorption analysis under in-plane impact of hexachiral honeycomb with different arrangements

Experimental study on out-of-plane mechanical and energy absorption properties of combined hexagonal aluminum honeycombs under dynamic impact

In-plane crushing behaviour of hierarchical honeycombs: finite element simulation and analytical modelling

Study on the Design of Cutting Disc in Ultrasonic-assisted Machining of Honeycomb Composites

Ultrasonic Longitudinal-Torsional Vibration-Assisted Cutting of Nomex® Honeycomb-Core Composites

In-plane compression characteristics of star-shaped honeycomb with asymmetric cells

3D printed self-similar AlSi10Mg alloy hierarchical honeycomb architectures under in-plane large deformation

Quasi-static Crushing Behavior of Aluminum Honeycomb Materials

Theoretical and Numerical Investigation of Bicellular Honeycomb under Axial Compression

In-plane crushing response and energy absorption of two different arranged circular honeycombs

Compressive Crushing of Novel Aluminum Hexagonal Honeycombs with Perforations: Experimental and Numerical Investigations

Experimental and numerical studies on the compressive mechanical properties of the metallic auxetic reentrant honeycomb

Enhanced Out-of-plane Compressive Strength and Energy Absorption of 3D Printed Square and Hexagonal Honeycombs with Variable-Thickness Cell Edges

Experimental and Numerical Studies on Defect Characteristics During Milling of Aluminum Honeycomb Core

Transverse Shear Modulus and Strength of Honeycomb Cores