In-plane compression characteristics of star-shaped honeycomb with asymmetric cells

Yuwen Chen,Huilan Huang,Xiaolin Deng

DOI: https://doi.org/10.1016/j.euromechsol.2024.105224

IF: 4.873

2024-05-01

European Journal of Mechanics - A/Solids

Abstract:A star-shaped honeycomb with asymmetric cells is proposed in this paper. The accuracy of the finite element model is verified by experiments, and the mechanical characteristics and deformation modes of the honeycomb are studied by numerical simulation. First, the energy absorption and deformation modes of a star-shaped honeycomb with asymmetric cells were studied under low-, medium- and high-velocity impacts. Second, the influence of different angles and different wall thicknesses on the energy absorption of honeycomb was studied. The results show that model 3 exhibits obvious negative Poisson's ratio characteristics under different impact velocities. As the angle increases, the energy absorption and plateau stress of mode 1 also increase. However, for mode 3, increasing θ can enhance the negative Poisson's ratio, but the specific energy absorption and plateau stress of the structure will decrease. Compared with the traditional star-shaped honeycomb, θ = 50° for mode 1, the specific energy absorption and plateau stress are increased by 21.53% and 13.32%, respectively. With increasing wall thickness, the specific energy absorption and plateau stress were significantly increased. Compared with mode 1 with t = 0.5 mm and mode 1 with t = 0.75 mm, the specific energy absorption and plateau stress increased by 50.51% and 125.56%, respectively.

mechanics