Abstract:Metal additive manufacturing finds its applications in various sectors, especially the automotive and aerospace industries, wherein weight reduction of components is of paramount importance with respect to performance and fuel consumption. However, additively manufactured metallic components usually undergo post-processing steps to make them ready for end use application. One of these steps is finish machining that is employed to overcome the surface irregularities and poor tolerances produced as a result of additive manufacturing (AM). These finish machining processes involve turning, milling, drilling, reaming, or grinding. This paper presents a three-dimensional (3D) finite element (FE) model to simulate the chip formation during the milling of an AM aluminum alloy AlSi10Mg, while taking microstructural porosity defects into consideration. The material was chosen for its significance in the aerospace and automotive industries. The proposed numerical model was developed using ABAQUSTM and is capable of predicting the cutting forces during the milling of AM AlSi10Mg. The Johnson-Cook strength and fracture models were utilized to simulate the deformation mechanics of the workpiece material subjected to high strains, high strain rates, and high temperatures caused by machining. Two algorithms have been proposed and discussed to model the microstructural defects in the AM metal. Machining tests were performed on an AM AlSi10Mg specimen block to validate the proposed finite element model. To further demonstrate the capability of the proposed model in capturing the influence of porosity on cutting forces, a study has been conducted revolving around the impact of different pore sizes. The chips produced during the machining tests were also collected to compare the morphologies between the numerically simulated chips and the ones obtained experimentally, to further strengthen the validity of the proposed model.

Modeling machining of aluminum honeycomb structure

Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy

Simulation of High-Speed Milling Process of Aerospace Aluminum Alloy

Simulated Study of the Machinability of the Nomex Honeycomb Structure

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Simulation of 3d Chip Shaping of Aluminum Alloy 7075 in Milling Processes

Enhancing the Machining Performance of Nomex Honeycomb Composites Using Rotary Ultrasonic Machining: A Finite Element Analysis Approach

Clamping Technology Optimization of High Speed Machining of NOMEX Honeycomb Core Based on Milling Force Model

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Numerical Simulation of Rotary Ultrasonic Machining of the Nomex Honeycomb Composite Structure

Optimization of High-speed Milling Prosess for NOMEX Honeycomb

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

Experimental and Numerical Studies on Defect Characteristics During Milling of Aluminum Honeycomb Core

Finite Element Simulation and Analysis of Aluminum Alloy Three-Dimensional Milling

Mechanistic modeling considering the bottom edge cutting effect and the material anisotropy during end milling of the aluminum honeycomb core

Instantaneous cutting force model considering the material structural characteristics and dynamic variations in the entry and exit angles during end milling of the aluminum honeycomb core

Investigation of Rotary Ultrasonic Vibration Assisted Machining of Nomex Honeycomb Composite Structures

A Numerical Simulation of Machining 6061 Syntactic Foams Reinforced with Hollow Al2O3 Shells

Milling of additively manufactured AlSi10Mg with microstructural porosity defects, finite element modeling and experimental analysis

Simulation of low rigidity part machining applied to thin-walled structures