Abstract:Overhead high-voltage transmission lines (HVTLs) extend over diverse geographic regions under uneven weather conditions, where sag and wind-induced conductor motion poses serious issues for uninterrupted power distribution by HVTLs. Sag reduces the ground clearance of the line, whereas conductor motion may result in phase to phase short circuit, and damage to support structure. A real-time estimate of these factors is deemed important to develop requisite prevention measures. In this paper, we present a novel method to cater for sag and motion estimation in real-world scenarios. Our method can detect a change in sag and conductor motion, whether it is symmetrical or unsymmetrical to one or more conductors. We require uniaxial magnetic-field (MF) sensors mounted at support tower, equal to conductors, and synchronized with current-transformer (CT) data at substation. The sensors provide noncontact MF measurements, which are time stamped and transmitted to the substation. The data are then simultaneously processed along with electric current readings from the CT. For processing, we developed a unified algorithm that first distinguishes variation in sag from motion in conductor. Then, it estimates the corresponding sag or motion in any of the conductors. The method is verified first by numerical simulations, and then with a scaled setup in laboratory. Different test cases were identified by the algorithm. Error remains <= 1% for unsymmetrical sag estimation. In addition, trajectory of a conductor in motion is retrieved. Where the root mean square error between actual and retrieved conductor amplitude was only 0.0833 for the observation window of 200 ms.

Calculation Methods of High-Voltage Direct Current (HVDC) Line Sag Considering Meteorology

Method for Dealing With Sag in Electromagnetic Transient Simulation of Overhead Line

Analysis of Non-Contact Measurement Methods for Sag of Overhead Transmission Lines

A method for sag calculation of conductor with large section based on super long thin elastic rod model

Estimating Sag and Wind-Induced Motion of Overhead Power Lines with Current and Magnetic-Flux Density Measurements

Measurement of Transmission Lines Conductor Sag Using Image Processing

Investigation of sag behaviour for aluminium conductor steel reinforced considering tensile stress distribution

Calculation and Analysis on Induced Voltage and Current of 1 000 Kv Transmission Line Adopting Structure of Double Circuit on the Same Tower

Sag Monitoring of Transmission Line Based on Motion Sensor

Simulative Calculation of UHV Line Secondary Arc Current

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

A Novel Voltage Sag Detection Method Based on a Selective Harmonic Extraction Algorithm for Nonideal Grid Conditions

Forecast Model of Transmission Line Sag Based on GA

Sag and Tension Calculations for High-Voltage Overhead Line Conductors

Current Reconstruction and Sag/Wind Deflection Monitoring of Transmission Lines by Magnetic Sensing

Simulation and analysis of induced voltage and induced current on overhead ground wire of Jindongnan-Nanyang-Jingmen 1000kV UHV AC transmission line

Voltage sag source location based on sag event amplitude information

Simulation and Analysis of Induced Voltage and Current on Overhead Ground Wire of Huainan～Wannan～Zhebei～Huxi 1000kv UHV AC Double-Circuit Transmission Line

Sag Online Monitoring System Based on Measurement of Axial Tension Transmission Lines

Full Scale Test Study on Sag Characteristics of Augmented Capacity Conductors for Transmission Line

Estimation of Current and Sag in Overhead Power Transmission Lines with Optimized Magnetic Field Sensor Array Placement