Abstract:Dense-phase-tower desulfurization technology is an emerging semi-dry flue-gas desulfurization ash process, i.e., the flue gas is allowed to enter the desulfurization tower from the bottom up and, at the same time, is sprayed with a desulfurizing agent that undergoes an acid–base reaction with the flue gas in the ascent process. The calcium sulfite and calcium sulfate produced by the reaction and the part of the desulfurization agent that is not involved in the reaction will enter the subsequent dust removal system, and what is retained is the by-product desulfurization ash. This desulfurization ash contains a large amount of calcium sulfite, which leads to its unstable nature; it is easily oxidized and expands in volume, and, if used in the field of building materials, it will lead to cracking and other problems, so it is difficult to effectively use it. In order to solve this problem, XRF, XRD, and iodometric and other analytical methods were used to determine the specific composition of desulfurization ash, and the muffle furnace and vertical tube furnace were used to study the thermal oxidative modification of calcium sulfite in desulfurization ash, to investigate the effects of the oxygen content, reaction temperature, medium flow rate, and chloride content on the oxidation of calcium sulfite, and to analyze the thermodynamics in the high-temperature oxidation reaction. The results showed that the oxidation rate of calcium sulfite increased with higher reaction temperatures. Increased oxygen content promoted the oxidation rate, particularly at low oxygen levels. The oxidation rate of calcium sulfite correlated positively with the medium flow rate until a rate of 75 mL·min− was reached. At a reaction temperature of 420 °C and a gas flow rate of 85 mL·min−1, the oxidation conversion efficiency exceeded 89%. Chloride content significantly reduced the oxidation rate of calcium sulfite, although this inhibition weakened at temperatures above 500 °C. Kinetic analysis suggested that the oxidation reaction of calcium sulfite predominantly occurred below 500 °C. These findings have both theoretical and practical implications for the thermal oxidation treatment and disposal of desulfurization ash.

Process optimization of S (IV) oxidation in flue gas desulfurization scrubbers

Mass Transfer and Kinetics Study on the Sulfite Forced Oxidation with Manganese Ion Catalyst

Mass transfer process intensification for SO2 absorption in a commercial-scale wet flue gas desulfurization scrubber

Study on Fine Particles Influence on Sodium Sulfite and Oxygen Gas-Liquid Reaction

Hybrid Modeling and Operating Optimization Method of Oxidation Process of Wet Flue Gas Desulfurization (WFGD) System

Operating optimization of oxidation subsystem of wet flue gas desulfurization system of 1000 MW coal-fired unit

Mechanical insights into desulfurization by peroxymonosulfate oxidation via a non-reactive oxygen species pathway

Kinetics of the sulfite forced oxidation reaction with Co2+ and Mn2+ catalyst

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

Operating optimization of oxidation subsystem of wet flue gas desulfurization system of 1 000 MW coal-fired unit

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Semi-dry flue gas desulphurization in spray towers: a critical review of applicable models for computational fluid dynamics analysis

Experimental investigation of sulfite oxidation enhancement in a micro-pore aeration system

Leading oxidation sprays multiple pollutant collaborative control system

Oxidation Study and Mechanism Analysis of Desulfurization Ash in Dense-Phase Tower

Optimization the operation parameters of SDA desulfurization tower by flow coupling chemical reaction model

Sulfite Oxidation in Seawater Flue Gas Desulfurization by a Pulsed Corona Discharge Process

Performance Optimization of Wet Flue Gas Desulphurization System Based on CFD Technology

Study on Flow Field Optimization in Wet Flue Gas Desulfurization Spray Scrubber

REACTION RATE OF SULFITE OXIDATION WITHOUT CATALYST

CFD Simulation with Enhancement Factor of Sulfur Dioxide Absorption in the Spray Scrubber