Abstract:In recent years, the utilization of copper tailing and removal of sulfur dioxide (SO2) have become the focus of research. In this study, copper tailing was used as an iron ion donator to remove SO2 from flue gas. To improve the desulfurization performance, the additive was selected from metal sulfates, such as ferrous sulfate, ferric sulfate, manganese sulfate, and scrap iron. A series of experiments were conducted in a bubble reactor to study the effects of various critical factors, including the inlet SO2 concentration, solid/liquid ratio, dosage of additive, gas flow rate, O-2 concentration, and reaction temperature, on the flue gas desulfurization performance. Various characterizations, such as X-ray fluorescence spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy with energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, inductively coupled plasma spectroscopy, and titration, were used to study the properties of copper tailing and absorption liquid. Furthermore, the reaction mechanism of SO2 removal was also studied. The results showed that copper tailing combined with MnSO4 center dot H2O exhibited the highest SO2 removal efficiency. The desulfurization efficiency reached approximately 99% and was mainly affected by the flue gas flow rate and the absorption temperature. Mn2+ served as a catalyst for liquid-phase catalytic oxidation. Furthermore, the leaching reaction contributed to the consumption of some H+, whereas Fe2+ (primarily leached from fayalite in the copper tailing) served as its activation state and variable valence state with Mn2+ for the efficient removal of SO2. Moreover, the reduction of flue gas desulfurization is attributed to the accumulation of SO42- and H+ in the slurry.

Mass Transfer and Kinetics Study on the Sulfite Forced Oxidation with Manganese Ion Catalyst

Kinetics of the sulfite forced oxidation reaction with Co2+ and Mn2+ catalyst

Study and optimization of catalytic oxidation technology in spent caustic desulfurization

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Study on the Reaction Rate of Sulfite Oxidation with Cobalt Ion Catalyst

Catalytic Oxidation of Calcium Sulfite in Solution/aqueous Slurry.

Study on Fine Particles Influence on Sodium Sulfite and Oxygen Gas-Liquid Reaction

REACTION RATE OF SULFITE OXIDATION WITHOUT CATALYST

Kinetics and Mechanism of Sulfite Oxidation in the Magnesium-Based Wet Flue Gas Desulfurization Process

Efficient calcium sulfite oxidation treatment by a highly active iron-manganese bimetallic metal-organic frameworks (MOFs)

Mechanistic and thermodynamic insights into the SO2 oxidation on MnO2 catalysts: A combined theoretical and experimental study

Oxidation Inhibition of Sulfite in Dual Alkali Flue Gas Desulfurization System.

[Inhibition of Sulfite Oxidation Catalyzed by Heavy Metals in Dual Alkali Flue Gas Desulfurization Slurry].

Removal and Resource Utilization of High Concentration Flue Gas Sulfur Dioxide Using Manganese Carbonate Ore

Manganese leaching in high concentration flue gas desulfurization process with semi-oxidized manganese ore

Sulfur Dioxide Capture by Heterogeneous Oxidation on Hydroxylated Manganese Dioxide.

Kinetics of Magnesium Sulfite Oxidation Catalyzed by Cobalt Using a Straw/sludge Substrate As Support

Sulfite Oxidation Catalyzed by Cobalt Ions in Flue Gas Desulfurization Processes

In-process control of manganese dithionate in the manganese ore-based wet flue gas desulfurization coupled with efficient manganese leaching

Process optimization of S (IV) oxidation in flue gas desulfurization scrubbers

Efficient Removal of Sulfur Dioxide from Flue Gas Through Liquid Catalytic Oxidation Using Copper Tailing As the in Situ Iron Ion Donator