Abstract:SO2, a typical component in coal-fired flue gas, always results in a decreased Hg-0 removal efficiency of the catalysts/adsorbents. Therefore, developing a catalyst/adsorbent with satisfactory sulfur resistance constitutes an important step in achieving the goal of mercury emission reduction. In this study, we modified MnOx-CeOx mixed oxide with CuCl2, aiming to enhance its SO2-tolerant ability and reveal the relevant promotional mechanisms. As 200 ppm SO2 was introduced, MnOx-CeOx suffered from deactivation with its Hg-0 removal efficiency decreasing from similar to 100% to similar to 80%. With increasing the SO2 concentration, this deactivation phenomenon was more pronounced. This was because SO2 had a greater affinity to MnOx-CeOx, which would drive the adsorbed Hg-0 away from the active sites. Besides, SO2 was able to rob the oxygen atoms from HgO formed on the MnOx-CeOx surface, which increased the Hg-0 concentration in the working gas and thus explained the decreased Hg-0 removal efficiency with SO2. Given the doping of CuCl2, the highly active Cl- favored the efficient oxidation of Hg-0, making the adverse factors arising from the Hg-0-SO2 competitive behaviors less influencing. Moreover, the produced HgCl2 tended to emit into the working gas instead of being stabilized on the material surface, which could be free from the reduction to Hg-0 by SO2. As a result, CuCl2-promoted MnOx-CeOx exhibited superior sulfur resistance; >95% Hg-0 removal efficiency was well-retained during the 320-min deactivation cycle. This result was vital to the stable operation of the MnOx-CeOx-based materials in coal-fired flue gas.

Manganese leaching in high concentration flue gas desulfurization process with semi-oxidized manganese ore

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Promotion of manganese extraction and flue gas desulfurization with manganese ore by iron in the anodic solution of electrolytic manganese

In-process control of manganese dithionate in the manganese ore-based wet flue gas desulfurization coupled with efficient manganese leaching

Removal and Resource Utilization of High Concentration Flue Gas Sulfur Dioxide Using Manganese Carbonate Ore

A one step process for manganese leaching-desulfurisation of flue gas

PARAMETERS AND MECHANISM ON ONE STEP PROCESS FOR MANGANESE LEACHING-DESULPHURIZATION OF FLUE GAS

Study on Separation of Manganese from Iron in High-Iron Pyrolusite Ore by Leaching with Simulated Flue Gas

Effect of O2 / SO2 Ratio in the Flue Gas on Manganese Extract Process and Byproduct in the Process of Flue Gas Desulfurization with Pyrolusite Pulp

Mechanisms of dry flue-gas desulfurization using natural manganese oxide ores

The Formation of Manganous Dithionate in the Manganese Oxide Flue Gas Desulfurization

Feasibility of Flue-Gas Desulfurization by Manganese Oxides

Mechanism and influence factors of flue gas desulfurization by symbiotic manganese oxides ore

Manganese Ore-based Wet Flue-Gas Desulfurization: A Review

Mass Transfer and Kinetics Study on the Sulfite Forced Oxidation with Manganese Ion Catalyst

Decomposition Characteristics of Manganese Dithionate in Absorption Solution of Flue Gas Desulfurization and Denitration with Pyrolusite Slurry

Study on optimum technological conditions of ore sintering flue gas desulfurization by using poor manganese

Comparative Study of the Flue Gas Desulfurization Using Different‐Grade Natural Manganese Oxides

Study on catalytic oxidation of calcium sulfite in flue gas desulfurization process by using manganese sulfate

Separation of Manganese from Iron in the SO_2 Reductive Leaching Iron-Rich Pyrolusite Ore: Leaching Mechanism and Kinetics

Oxidation kinetics of dithionate compound in the leaching process of manganese dioxide with manganese dithionate