Abstract:In recent years, the utilization of copper tailing and removal of sulfur dioxide (SO2) have become the focus of research. In this study, copper tailing was used as an iron ion donator to remove SO2 from flue gas. To improve the desulfurization performance, the additive was selected from metal sulfates, such as ferrous sulfate, ferric sulfate, manganese sulfate, and scrap iron. A series of experiments were conducted in a bubble reactor to study the effects of various critical factors, including the inlet SO2 concentration, solid/liquid ratio, dosage of additive, gas flow rate, O-2 concentration, and reaction temperature, on the flue gas desulfurization performance. Various characterizations, such as X-ray fluorescence spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy with energy-dispersive spectroscopy, X-ray photoelectron spectroscopy, inductively coupled plasma spectroscopy, and titration, were used to study the properties of copper tailing and absorption liquid. Furthermore, the reaction mechanism of SO2 removal was also studied. The results showed that copper tailing combined with MnSO4 center dot H2O exhibited the highest SO2 removal efficiency. The desulfurization efficiency reached approximately 99% and was mainly affected by the flue gas flow rate and the absorption temperature. Mn2+ served as a catalyst for liquid-phase catalytic oxidation. Furthermore, the leaching reaction contributed to the consumption of some H+, whereas Fe2+ (primarily leached from fayalite in the copper tailing) served as its activation state and variable valence state with Mn2+ for the efficient removal of SO2. Moreover, the reduction of flue gas desulfurization is attributed to the accumulation of SO42- and H+ in the slurry.

Ore sintering flue gas desulfurization and its resoureilization by using pyrolusite

Study on optimum technological conditions of ore sintering flue gas desulfurization by using poor manganese

Manganese Ore-based Wet Flue-Gas Desulfurization: A Review

Study on Flue Gas Desulfurization with Rhodochrosite and Pyrolusite Pulp

A Pilot-Scale Jet Bubbling Reactor for Wet Flue Gas Desulfurization with Pyrolusite.

Mechanisms of dry flue-gas desulfurization using natural manganese oxide ores

Study on kinetics of flue gas desulfurization with pyrolusite slurry

Catalysis in the process of flue gas desulphurization by low concentration pyrolusite slurry

Mechanism and influence factors of flue gas desulfurization by symbiotic manganese oxides ore

Removal and Resource Utilization of High Concentration Flue Gas Sulfur Dioxide Using Manganese Carbonate Ore

Simultaneously Removing of Iron and Aluminum From Leaching Liquor of Flue Gas Desulfurization With Pyrolusite

In-process control of manganese dithionate in the manganese ore-based wet flue gas desulfurization coupled with efficient manganese leaching

Study on Flue Gas Desulfurization with Pyrolusite Pulp

Mechanism of Enhancing the SO2-resistance and Gaseous Arsenic Removal Performance of Iron-modified Pyrolusite

Feasibility of Flue-Gas Desulfurization by Manganese Oxides

A NEW PROCESS OF SIMULTANEOUS REMOVAL OF SO_2 AND NO_X FROM FLUE GAS WITH PYROLUSITE SLURRY

Effect of O2 / SO2 Ratio in the Flue Gas on Manganese Extract Process and Byproduct in the Process of Flue Gas Desulfurization with Pyrolusite Pulp

[Inhibition of Sulfite Oxidation Catalyzed by Heavy Metals in Dual Alkali Flue Gas Desulfurization Slurry].

Removal of SO2 from Smelting Flue Gas by Using Copper Tailings with MnSO4: Factors Optimization by Response Surface Methodology

Efficient Removal of Sulfur Dioxide from Flue Gas Through Liquid Catalytic Oxidation Using Copper Tailing As the in Situ Iron Ion Donator

Process and Mechanism of Catalyzed Oxidation of SO2 with Pyrolusite Slurry