Abstract:Heavy metals accumulated in slurry of dual alkali flue gas desulfurization (FGD) present a significant catalysis to SO3(2-) oxidation, resulting in a waste of effective components for desulfurization. Na2S was adopted to precipitate heavy metal ions in FGD slurry, and the oxidation rate of SO3(2-) was obtained under different concentrations of heavy metal ions, to reveal the inhibition effect of Na2S on SO3(2-) oxidation catalyzed by heavy metal ions. Mn2+ showed a remarkable catalysis to SO3(-2) oxidation, as the initial oxidation rate of SO3(2-) was tripled to 0.65 mmol/(L x min) by adding 1.0 mmol/L Mn2+ into the slurry. SO3(2-) was catalytically oxidized rapidly with the reaction order 0.169 of Mn2+ within first 60 minutes, so it is of great importance to control the concentration of Mn2+ to inhibit SO3(2-) oxidation. At initial pH value of 6.50-8.50, Na2S removed heavy metal ions effectively from FGD slurry. Higher pH value favored the removal of heavy metal ions. The removal efficiencies of Mn2+, Zn2+, Ni2+ and Cd2+ were 91.0%, 88.1%, 85.5%, and above 99.9% respectively under the conditions of initial pH value 8.50 and Na2S dosage 240.0 mg/L. Mn2+ could be used as an indicator for the concentration of the heavy metal ions in the slurry. As the Mn2+ concentration decreased from 1.0 mmol/L to 5.0 x 10(-3) mmol/L by adding Na2S, the initial oxidation rate of SO3(2-) decreased by 64.6% to 0.23 mmol/(L x min). The desulfurization efficiencies increase 3.8%-5.1% by adding Na2S in a pilot scale setup. It comes to conclusion that heavy metal ions precipitation by adding Na2S with an indicator of Mn2+ to inhibit catalytic oxidation of SO3(2-) is feasible to reduce the consumption of desulfurizer in FGD slurry.

Mechanisms of dry flue-gas desulfurization using natural manganese oxide ores

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Comparative Study of the Flue Gas Desulfurization Using Different‐Grade Natural Manganese Oxides

Mechanism and influence factors of flue gas desulfurization by symbiotic manganese oxides ore

Removal and Resource Utilization of High Concentration Flue Gas Sulfur Dioxide Using Manganese Carbonate Ore

Manganese Ore-based Wet Flue-Gas Desulfurization: A Review

Feasibility of Flue-Gas Desulfurization by Manganese Oxides

In-process control of manganese dithionate in the manganese ore-based wet flue gas desulfurization coupled with efficient manganese leaching

Promotion of manganese extraction and flue gas desulfurization with manganese ore by iron in the anodic solution of electrolytic manganese

Ore sintering flue gas desulfurization and its resoureilization by using pyrolusite

The Formation of Manganous Dithionate in the Manganese Oxide Flue Gas Desulfurization

Study on optimum technological conditions of ore sintering flue gas desulfurization by using poor manganese

Manganese leaching in high concentration flue gas desulfurization process with semi-oxidized manganese ore

Effect of O2 / SO2 Ratio in the Flue Gas on Manganese Extract Process and Byproduct in the Process of Flue Gas Desulfurization with Pyrolusite Pulp

[Inhibition of Sulfite Oxidation Catalyzed by Heavy Metals in Dual Alkali Flue Gas Desulfurization Slurry].

Study on Flue Gas Desulfurization with Rhodochrosite and Pyrolusite Pulp

Mechanistic and thermodynamic insights into the SO2 oxidation on MnO2 catalysts: A combined theoretical and experimental study

Study on dry desulfurization performance of MnOx hydrothermally loaded halloysite desulfurizer

Flue gas desulfurization by natural recyclable manganese ore in packed bed reactor and its performance prediction by random pore model

A one step process for manganese leaching-desulfurisation of flue gas

Experiment and Mechanism Analysis of Desulfurization with a MgO-Based Desulfurizer Fixed Bed Method