Abstract:High entropy alloy has attracted extensive attention due to the increased requirement for future high temperature structural superalloys. Quaternary Al-Cr-Fe-Ni alloys have been developed in recent years and have the potential to be employed as superalloy materials. How to improve the mechanical properties with strength and ductility balancing at room temperature and further improve the high temperature perfor-mance is an urgent problem to be solved. Thus, phase regulations were achieved by designing quaternary Al-Cr-Fe-Ni high-entropy alloys with different Al content to achieve excellent room temperature and high temperature mechanical properties to lay the foundation for its application. Here, a Co-free FeCrNiAl0.77 alloy (Al0.77 alloy) with low density and low cost was proposed and successfully manufactured by arc-melting. With the variation of Al element, the alloys were identified to be eutectic-like spinodal decom-position microstructures with dual BCC phase, consisting of the ordered B2 dendritic regions (enriched in Ni and Al), and disordered BCC inter-dendritic regions (enriched in Fe and Cr elements). The addition of Al can effectively decrease the density and slightly reduce the hardness. The Al0.77 alloy has a minimum density with 6.89 g/cm(3) and a high hardness above 470 kgf/mm(2). The light-weight alloys exhibit promising com-prehensive mechanical properties by virtue to balance the strength and ductility, and have a compressive strength of above 3000 MPa and a compressive strain more than 44%. Furthermore, the Al0.77 alloy still remains high yield strength of 219 MPa at 900 degrees C with the volume fraction of B2 phase of 50.92% via the modulation of B2 phase. The quantitative strengthening mechanisms of Al0.77 alloy were presented, and the competitive strength increments of about 1148 MPa could be mainly attributed to the ordered and coherent microstructures and the nanosized precipitates embedded in the B2 phase regions. The proposed Al0.77 alloy with well balancing of specific strength and strain shows a great potential in the application in aerospace fields. (C) 2022 Published by Elsevier B.V.

Development of lightweight Al-based entropy alloys for elevated temperature applications

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Lightweight Al-based entropy alloys: Overview and future trend

Microstructure and mechanical properties of the (TiZrV)100-xAlx medium-entropy alloys

Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature

High Thermal Stability and Oxidation Behavior of FeCrNiAl-based Medium-Entropy Alloys Prepared by Powder Metallurgy

Enhancing High Temperature Mechanical Properties Via Modulating B2 Phase with Al Contents in FeCrNiAlx(x=0.63,0.71,0.77) High Entropy Alloys

Microstructural Evolutions and Mechanical Properties of Energetic Al1 (TiZrNbTaMoCr)15 High-Entropy Alloys

A Low-Cost Lightweight Entropic Alloy with High Strength

High-Temperature Mechanical Behavior of Cobalt-Free FeMnCrNi(Al) High-Entropy Alloys

Entropy‐Engineered Aluminum‐Based Superalloys with Superior High‐Temperature Mechanical Properties

Temperature-dependent mechanical behavior of an Al 0.5 Cr 0.9 FeNi 2.5 V 0.2 high-entropy alloy

Compositional regulation in additive manufacturing of precipitation-hardening (CoCrNi) 94 Ti 3 Al 3 medium-entropy superalloy: cellular structure stabilization and strength enhancement

A hypoeutectic high-entropy alloy with hierarchical microstructure for high-temperature application

Stability of FeCrNiTiAl high-entropy alloy at high temperature

Designing Nanoparticles-Strengthened High-Entropy Alloys with Simultaneously Enhanced Strength-Ductility Synergy at Both Room and Elevated Temperatures

A Strong-Yet-ductile High-Entropy Alloy in a Broad Temperature Range from Cryogenic to Elevated Temperatures

Deformation mechanisms of Al0.1CoCrFeNi at elevated temperatures

Thermophysical Properties and High Temperature Oxidation Behavior of FeCrNiAl0.5 Multi-Component Alloys