Abstract:Currently, the Cu-based catalyst has become a promising candidate for ethanol and higher alcohols synthesis (HAs) from synthesis gas (H2 + CO), but all these catalysts contain F–T elements (e.g., Co and Fe) and alkalis because carbon chain growth reaction occurs on these metal components. Herein, two series of ternary CuZnAlOOH catalysts with various Cu and Al proportions were synthesized using a complete liquid-phase method and studied in the conversion of syngas in a slurry bed reactor. Significantly higher selectivity of ethanol (40 wt %) and HA (65 wt %) with approximately 20% CO conversion was achieved when the n(Cu)/n(Al) = 2/0.8, which was ascribed the highest copper surface area (SCu) and the surface Cu content. It was found that the Cu component had a significant effect on CO conversion, while the Al component had more influence on the selectivity of HA. Besides, the coke deposition was discovered to be the main reason for catalyst deactivation. The generation of hydrocarbons and alcohols followed A–S–F distributions, which was consistent with a representative mechanism of HA generation by CO insertion into the CHx intermediate. A synergetic mechanism between Cu0–Cu+ and AlOOH active sites was proposed based on the characterization analysis and activity results, in which Cu0–Cu+ synergy acted as sites for H2 dissociative adsorption and associative adsorption of CO, while the AlOOH facilitated the dissociation of the C–O bond. Bifunctionality of the Cu and AlOOH active sites and their cooperation created their synergy in CO hydrogenation to ethanol and HA. This work provided us a new concept to understand and develop carbon chain growth mechanism, and it also could provide reference for other related carbon chain growth reactions.

A highly selective catalyst of Co/La4Ga2O9 for CO2 hydrogenation to ethanol

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Effect of La2O3- decorated SiO2 on the performance of CuCo catalyst for direct conversion of syngas to ethanol

Using CoCu 2 Ga/SiO 2 to identify stability-issues in ethanol-selective Co-Cu alloyed catalysts in carbon monoxide hydrogenation

Electron density donation of concomitant peroxide anions in La0.25Ce0.75O1.88 boosting cobalt-catalyzed ethanol steam reforming for hydrogen production

Constructing the active pairs of Co0-Co2+ via surface solid reaction on TiO2 with the additives of La and Al for higher alcohols synthesis

Tailored design of novel Co0-Coδ+ dual phase nanoparticles for selective CO2 hydrogenation to ethanol

Cobalt–Nickel Catalysts for Selective Hydrogenation of Carbon Dioxide into Ethanol

Hydrogen production by ethanol steam reforming over Ni–Co–Al mixed oxides derived from LDH

Si4Al2O2N6 regulating chemical states of Co catalyst for improved hydrogen production from ethanol steam reforming

Isolated dual-active Fe-Co sites efficiently promote CO 2 hydrogenation upgrading

Carbon modified active pairs of Co-Co2C for CO2 hydrogenation to alcohols

Highly active and stable Co nanoparticles embedded in nitrogen-doped mesoporous carbon nanofibers for aqueous-phase levulinic acid hydrogenation

Synthesis of higher alcohols by CO hydrogenation over catalysts derived from LaCo1-xMnxO3 perovskites: Effect of the partial substitution of Co by Mn

Oxygen vacancies boosted Co-Co2C catalysts for higher alcohols synthesis from syngas

Effect of Lanthanum Promotion on the Unsupported Mo–Co–K Sulfide Catalysts for Synthesis of Mixed Alcohols from Syngas

Synergy between Active Sites of Ternary CuZnAlOOH Catalysts in CO Hydrogenation to Ethanol and Higher Alcohols

Cu/LaFeO3 As an Efficient and Stable Catalyst for CO2 Reduction: Exploring Synergistic Effect Between Cu and LaFeO3

Construction of Synergistic Co/CoO Interface to Enhance Hydrogenation Activity of Ethyl Lactate to 1,2‐Propanediol

Mo–Co–K Sulfide-Based Catalysts Promoted by Rare Earth Salts for Selective Synthesis of Ethanol and Mixed Alcohols from Syngas