Abstract:Bimetallic CoCu model catalysts were investigated for the synthesis of higher alcohols using catalytic CO hydrogenation according to the Fischer–Tropsch technology. Emphasis was placed on revealing the influence of the activation conditions. Accordingly, catalyst precursors were activated in argon, hydrogen, syngas (CO/H2), and CO under atmospheric conditions and at elevated temperatures (370 °C). All catalyst precursors were prepared via oxalate coprecipitation in the absence of a classic support. Alcohol selectivities between 30 and ∼40% (up to ∼50% for the sum of alcohols and alkenes) were obtained with an Anderson–Schulz–Flory (ASF) chain lengthening probability maximizing the slate up to C6. Detailed catalysis and characterization studies were performed using a Co2Cu1 catalyst composition. The catalytic performances of the H2- and syngas-activated Co2Cu1 catalyst were similar. While the CO-activated catalyst shows significantly higher catalytic activity and ASF chain lengthening probability, the alcohol selectivities are lower than those of H2- or syngas-activated ones. All catalysts required time on stream for several hours to achieve steady-state catalytic performance. Co2Cu1 catalysts were characterized by temperature-programmed decomposition (TPDec), in situ N2 physisorption (Brunauer–Emmett–Teller), transmission electron microscopy (TEM), and in situ X-ray photoelectron spectroscopy (XPS). The data indicate major restructuring occurs during activation. An “onion-like” graphitic carbon shell was observed via TEM for the CO-activated Co2Cu1 catalyst, which probably originated mainly from the Boudouard reaction (2CO + [ ]ad → Cad + CO2). This interpretation is in accordance with the TPDec profiles and XPS results. The latter also indicates that syngas and CO activation lead to higher than nominal Co/Cu surface ratios. The surface segregation of Co in the presence of CO atmospheres is interpreted on the basis of Co@Cu core–shell structured particles.

Carbon modified active pairs of Co-Co2C for CO2 hydrogenation to alcohols

Enhanced CH4 Production from CO2 Hydrogenation on Γ-Alooh-supported Cobalt Catalyst with Abundant Surface Coordination Unsaturated Oxygen Atoms

Constructing the active pairs of Co0-Co2+ via surface solid reaction on TiO2 with the additives of La and Al for higher alcohols synthesis

Tailored design of novel Co0-Coδ+ dual phase nanoparticles for selective CO2 hydrogenation to ethanol

Synthesis of Higher Alcohols from CO 2 Hydrogenation over Mo–Co–K Sulfide-Based Catalysts

Pt3Co Octapods As Superior Catalysts of CO2 Hydrogenation

Isolated dual-active Fe-Co sites efficiently promote CO 2 hydrogenation upgrading

Synergy between Active Sites of Ternary CuZnAlOOH Catalysts in CO Hydrogenation to Ethanol and Higher Alcohols

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Higher Alcohols through CO Hydrogenation over CoCu Catalysts: Influence of Precursor Activation

Carbon-Supported Fe-Based Catalyst for Thermal-Catalytic CO2 Hydrogenation into C2+ Alcohols: The Effect of Carbon Support Porosity on Catalytic Performance

Elucidating the Copper–Hägg Iron Carbide Synergistic Interactions for Selective CO Hydrogenation to Higher Alcohols

Exploiting Co-C interface and graphitic carbon belts for enhanced structural stability of a porous layered Co-C catalyst for CO 2 hydrogenation

Syngas conversion to higher alcohols via wood-framed Cu/Co-carbon catalyst

Effect of the promoter and support on cobalt-based catalysts for higher alcohols synthesis through CO hydrogenation

Structural evolution of bimetallic Co-Cu catalysts in CO hydrogenation to higher alcohols at high pressure

Activated Carbon‐Supported Mo‐Co‐K Sulfide Catalysts for Synthesizing Higher Alcohols from CO2

Revealing and Regulating the Complex Reaction Mechanism of CO 2 Hydrogenation to Higher Alcohols on Multifunctional Tandem Catalysts

Theoretical investigation of the selectivity of alcohols and aldehydes on Co-based catalysts in syngas conversion