Abstract:Geopolymers are prepared by alkali solution-activated natural minerals or industrial waste materials, which have been widely used as new sustainable building and construction materials for their excellent thermal and mechanical properties. The thermal and mechanical properties of geopolymers at high temperature have attracted great attention from many researchers. However, there are few systematic works concerning these two issues. Therefore, this work reviewed the thermal and mechanical behaviors of geopolymers at high temperature. Firstly, the thermal properties of geopolymers in terms of mass loss, thermal expansion, and thermal conductivity after high temperature were explained. Secondly, the mechanical properties of residual compressive strength and stress-strain relationship of fly ash geopolymers and metakaolin geopolymers after high temperature were analyzed. Finally, the microstructure and mineralogical characteristics of geopolymers upon heating were interpreted according to the changes of microstructures and compositions. The results show that the thermal properties of geopolymers are superior to cement concrete. The geopolymers possess few mass loss and a low expansion ratio and thermal conductivity at high temperature. The thermal and mechanical properties of the geopolymers are usually closely related to the raw materials and the constituents of the geopolymers. Preparation and testing conditions can affect the mechanical properties of the geopolymers. The stress-strain curves of geopolymer are changed by the composition of geopolymers and the high temperature. The silicon-type fillers not only improve the thermal expansion of the geopolymers but also enhance mechanical properties of the geopolymers. But, they do not contribute to reducing the thermal conductivity. the different raw materials, aluminosilicate precursor and reinforcement materials, result in different geopolymer damage during the heating. However, phase transitions can occur during the process of heating regardless of the raw materials. The additional performance enhancements can be achieved by optimizing the paste formulation, adjusting the inner structure, changing the alkali type, and incorporating reinforcements.

Predicting thermal properties and temperature rise in geopolymer concrete structures

Fire resistance characteristics of geopolymer concrete for environmental sustainability: a review of thermal, mechanical and microstructure properties

Latest Progress of Mechanical Properties of Geopolymer Concrete at Elevated Temperature

Development of a high-strength lightweight geopolymer concrete for structural and thermal insulation applications

Properties of a New Insulation Material Glass Bubble in Geopolymer Concrete

Effect of the elevated temperature on the mechanical properties of geopolymer concrete using fly ash and ground granulated blast slag

Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature

Effect of Expanded Glass Lightweight Aggregate on the Performance of Geopolymer Mortar at Elevated Temperatures

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

Study on the mechanical behavior of construction and demolition waste-based geopolymers under high-temperature conditions

Thermal and Mechanical Properties of Geopolymers Exposed to High Temperature: A Literature Review

Compressive and thermal properties of foamed concrete at high temperature

Enhancing Fire Resistance of Geopolymers Modified with Thermal Insulation Additives

Experimental and Numerical Study on the Blast Resistant Performance of Geopolymer Concrete

Microstructural Analysis of Low-Calcium Fly Ash-Based Geopolymer Concrete with Different Ratios of Activator and Binder Under High Temperatures

Comprehensive investigation of the durability and mechanical properties of eco-friendly geopolymer concrete (alkali-activated)

Geopolymer Concrete Performance Study for High-Temperature Thermal Energy Storage (TES) Applications

A Review on Mechanical Properties of Geopolymer Composites for High Temperature Application

Thermal Properties and Drying Shrinkage Performance of Palm Kernel Shell Ash and Rice Husk Ash-Based Geopolymer Concrete

Short-term residual characteristics of ambient-cured green geopolymer mortar exposed to elevated temperatures

Experimental Investigation of Heating–cooling Effects on the Mechanical Properties of Geopolymer-Based High Performance Concrete Heated to Elevated Temperatures