Abstract:The integration of high-temperature resistant geopolymer concrete, reinforced with basalt fiber reinforced polymer (BFRP), addresses several challenges encountered by conventional reinforced concrete structures, such as elevated energy consumption, substantial carbon emissions, and susceptibility to steel corrosion. To investigate the impact of geopolymer concrete cover on the mechanical performance of BFRP bars after high temperature treatment, this study conducted mechanical tests on a total 406 tensile specimens and 406 transverse shear specimens, spanning a temperature range from ambient temperature to 700 °C. The BFRP bars with diameters of 6 mm, 12 mm, and 16 mm underwent heat treatment durations of 0 h, 1 h, 2 h, and 3 h. Subsequently, they were examined for mass loss rat, residual tensile properties, and residual shear strength following natural cooling. Notably, this study also compared the impact of different geopolymer concrete cover thickness (30 mm, 40 mm, and 50 mm) on these performance parameters. The test results revealed that with an increase in heating temperature, the resin of BFRP experienced decomposition, leading to alterations in surface morphology, as well as changes in tensile and shear failure modes. In the temperature range of 400 °C to 700 °C, bare BFRP bars exhibited a significant decrease in both tensile and transverse shear strengths, with strength loss rates ranging from 50% to 90%. Moreover, the degradation in shear strength was comparatively slower than that in tensile strength. The presence of geopolymer concrete cover effectively mitigated the strength degradation of BFRP bars following high temperature treatment, and this protective effect improved with an increase in the concrete cover thickness. Additionally, scanning electron microscope (SEM) analysis was employed to elucidate the damage mechanisms for both bare and geopolymer concrete-covered BFRP bars. SEM results indicated that the deterioration induced by high temperature treatment gradually propagated radially from the edge to the core area of the bar. Finally, a simplified calculation model was adopted to evaluate the residual tensile strengths of BFRP bars wrapped in geopolymer concrete after high temperature treatment.

Experimental Investigation of Heating–cooling Effects on the Mechanical Properties of Geopolymer-Based High Performance Concrete Heated to Elevated Temperatures

Experimental study on dynamic behavior of concrete at elevated temperatures

Study on the Fracture Mechanical Properties of High Performance Concrete (HPC) with Rapid Cooling after High Temperature

Transport Properties and Resistance Improvement of Ultra-High Performance Concrete (UHPC) after Exposure to Elevated Temperatures

Effect of Cooling Method on Physical and Mechanical Properties of PVA Fiber-Reinforced High-Strength Concrete Exposed to High Temperature

An Experimental Study on the Influence of Different Cooling Methods on the Mechanical Properties of PVA Fiber-Reinforced High-Strength Concrete after High-Temperature Action

Mechanical Properties of HPC Incorporating Fly Ash and Ground Granulated Blast Furnace Slag After Exposure to High Temperatures

Fire damaged ultra-high performance concrete (UHPC) under coupled axial static and impact loading

Insight into the Mechanical Performance of the UHPC Repaired Cementitious Composite System after Exposure to High Temperatures

Mechanical and Thermal Properties of UHPC Exposed to High-Temperature Thermal Cycling

Study of Ultra-High Performance Concrete Mechanical Behavior under High Temperatures

Effect of geopolymer concrete cover on improving tensile and transverse shear behaviors of BFRP bars after exposure to high temperature

Thermal Resistance, Water Absorption and Microstructure of High-Strength Self-Compacting Lightweight Aggregate Concrete (HSSC-LWAC) after Exposure to Elevated Temperatures

Comparative analysis of dynamic mechanical properties of steel fiber reinforced concrete under ambient temperature and after exposure to high temperatures

Study on preparation and mechanical properties of a new type of high-temperature resistant ultra-high performance concrete

Study on Micro-mesoscale Characterization and Impact Load Mechanical Properties of Ultra-High-Performance Concrete After Sustained Elevated Temperature

Effect of fibers addition on mechanical properties of eco-friendly phosphogypsum-based composite at high temperatures

Combined effect of natural fibre and steel fibre on the thermal-mechanical properties of UHPC subjected to high temperature

Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

Microstructure and mechanical behaviour of 3D printed ultra-high performance concrete after elevated temperatures