Thermal Properties and Drying Shrinkage Performance of Palm Kernel Shell Ash and Rice Husk Ash-Based Geopolymer Concrete

Mohd Na’im Abdullah,Faizal Mustapha,Nurul ‘Izzati Yusof,Tabrej Khan,Tamer A. Sebaey
DOI: https://doi.org/10.3390/ma17061298
IF: 3.4
2024-03-12
Materials
Abstract:This study aims to develop suitable formulations of geopolymer concrete (GPC) by varying the percentages of the geopolymer with aggregates and evaluating the performances in thermal and mechanical properties of palm kernel shell ash (PKSA)-GPC compared to rice husk ash (RHA)-GPC and ordinary Portland cement concrete (OPCC). Preliminary tests were conducted to select the best mix design ratios before casting the specimens. Then, the performance of the PKSA-GPC, RHA-GPC and OPCC specimens was evaluated based on their thermal performance and drying shrinkage. The mix designs of PKSA-GPC 70:30, PKSA-GPC 60:40, PKSA-GPC 50:50 and PKSA-GPC 66.6:33.3 were found to produce an acceptable consistency, rheological and thixotropic behaviour for the development of the GPC. PKSA-GPC showed a better thermal performance than the RHA-GPC and OPCC due to their strong and dense intumescent layers and slow temperature increment upon exposure to a high flame temperature from ambient temperature to 169 °C. The low molar ratio of the Si/Al present in the PKSA-GPC created a thermally stable intumescent layer. In the drying shrinkage test, PKSA-GPC 60:40 and RHA-GPC 60:40 shared an equal drying shrinkage performance (5.040%) compared to the OPCC (8.996%). It was observed that microcrack formation could significantly contribute to the high shrinkage in the PKSA-GPC 50:50 and RHA-GPC 70:30 specimens. The findings of this study show that PKSA could be incorporated into GPC as a fire-retardant material due to its capability of prolonging the spread of fire upon ignition and acting as an alternative to the conventional OPCC.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to develop a suitable alkali - activated concrete (Geopolymer Concrete, GPC) formula. By changing the ratio of geopolymer to aggregate, it evaluates the performance of Palm Kernel Shell Ash (PKSA) - GPC, Rice Husk Ash (RHA) - GPC and Ordinary Portland Cement Concrete (OPCC) in terms of thermal properties and drying shrinkage properties. Specifically, the research aims to: 1. **Develop new and optimized geopolymer concrete formulas**: By adjusting the ratio of geopolymer to aggregate, find the best mix design ratio to achieve good consistency and rheology. 2. **Evaluate thermal properties**: Compare the thermal stability and fire - resistance properties of PKSA - GPC, RHA - GPC and OPCC at high temperatures. 3. **Evaluate drying shrinkage properties**: Through drying shrinkage tests, compare the drying shrinkage rates of different GPC formulas and OPCC, and analyze their microstructure changes. The research background points out that traditional Ordinary Portland Cement Concrete generates a large amount of carbon dioxide emissions during the production process, which has a negative impact on the environment. Therefore, developing environmentally - friendly geopolymer concrete can not only reduce carbon emissions, but also improve the fire - resistance performance and energy - saving effect of buildings. In particular, using agricultural wastes such as palm shell ash and rice husk ash as raw materials can further reduce environmental pollution and realize the recycling of resources.