Abstract:In the field of marine engineering, the application of Cu-containing antibacterial high-entropy alloys (HEAs) are inevitably subjected to the damage of both wear and corrosion. However, there is a lack of the fundamental understanding of the effect of Cu distribution on the tribo-corrosion mechanisms of alloys in marine environments. In this study, the working conditions of the alloy in a standard 3.5 wt% NaCl solution were simulated to investigate the tribo-corrosion behaviour of CoCrFeNiCu 0.3 HEAs with different distribution states of Cu. The focus was put on the effect of copper distribution on the tribo-corrosion mechanisms of the alloy. The research unveiled a correlation where the progressive dissolution of the copper element led to an elevation in the friction coefficient of the alloy, concomitantly resulting in a reduction in the wear rate. Alloys with the homogeneous distribution of copper exhibited optimal tribo-corrosion resistance. Furthermore, the transition of the copper distribution from segregation to homogeneity led to a shift in the tribo-corrosion mechanisms of the CoCrFeNiCu 0.3 alloy from abrasive and corrosive wear to mild abrasive and oxidative wear. Moreover, the results demonstrated that by dissolving the Cu-rich phase and ensuring a homogeneous distribution of copper within the sintered alloy, the formation of corrosive microcouples and the detachment of oxidized debris were effectively suppressed. This promoted the formation of a protective chromium oxide layer in the groove region. The distribution optimization of copper towards homogeneity during the sintering process effectively enhanced the tribo-corrosion resistance of alloys. This work provides helpful guidance for material design and marine protection in the field of marine engineering.

The inhibition effects of Cu and Ni alloying elements on corrosion of HSLA steel influenced by Halomonas titanicae

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Corrosion of EH40 steel affected by Halomonas titanicae dependent on electron acceptors utilized

The influence of Ni on the microstructure and corrosion resistance of high-strength low alloy steel in the Cl-containing environment

Synergistic effect of Cu and Ni on atmospheric corrosion resistance for low-alloying steel in wet/dry cyclic industrial environment

Effects of Cr and Ni on the microstructure and corrosion resistance of high-strength low alloy steel

Extracellular electron transfer corrosion mechanism of two marine structural steels caused by nitrate reducing Halomonas titanicae

Clarifying the effect of Cu element on the corrosion properties of Ni-Mo low alloy steel in marine environment

Effect of the distribution of Cu on the tribo-corrosion mechanisms of CoCrFeNiCu 0.3 high-entropy alloys

Effects of Cu on the corrosion resistance of heat-treated weathering steel in a marine environment

Effect of Hf addition on microstructural evolution and corrosion behavior of nickel-based alloys in hydrochloric acid

Corrosion resistance and corrosion behavior of high‐copper‐bearing steel in marine environments

Inhibition of microbial extracellular electron transfer corrosion of marine structural steel with multiple alloy elements

The Role of the Bactericidal Mechanism of Copper Elements and Its Effect on the Corrosion Resistance of Steel

Effect of Al alloying on corrosion performance of steel

Effect of Cu and Ni on Corrosion Resistance of Low Alloyed Steels for Cargo Oil Tank

Inhibition Effect on Microbiologically Influenced Corrosion of Ti-6Al-4V-5Cu Alloy Against Marine Bacterium Pseudomonas Aeruginosa

Effects of elemental composition and microstructure inhomogeneity on the corrosion behavior of nickel-based alloys in hydrofluoric acid solution

Alternate immersion improves corrosion inhibition efficiency of Halomonas titanicae towards EH40 steel

Evaluation of inhibition effect on microbiologically influenced corrosion of Ti-5Cu alloy against marine Bacillus vietnamensis biofilm

Effects of Ti and Cu Addition on Inclusion Modification and Corrosion Behavior in Simulated Coarse-Grained Heat-Affected Zone of Low-Alloy Steels