Abstract:In this study, corrosion weight loss experiments were conducted to explore the corrosion-inhibiting properties of a composite inhibitor consisting of carboxymethyl chitosan (CMCS) and sodium humate (SH) at varying concentrations on EH40 steel in seawater. An investigation was conducted into the electrochemical behavior of EH40 steel in seawater and the mechanism of composite inhibitor consisting of carboxymethyl chitosan (CMCS) and sodium humate (SH) at varying concentrations on EH40 steel in seawater through an electrochemical test. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy and energy-dispersion spectroscopy (SEM-EDS), Fourier transform infrared absorption spectroscopy (FTIR), and contact angle measurements were performed to confirm the mechanism of CMCS and SH as well as their composite corrosion inhibitors at the interface between seawater and EH40 steel. Furthermore, density functional theory (DFT) calculation supports the experimental findings. The results show that CMCS, SH, and their composite inhibitor are a mixed type of corrosion inhibitor that mainly inhibits cathodic reactions and corrosion through the active site blocking mechanisms. Their corrosion inhibition effect increases with the increase of mass concentration, and the composite inhibitor performs better in corrosion inhibition and scale inhibition than the individual inhibitor. When the CMCS mass concentration reaches 100 mg/L and the SH mass concentration reaches 50 mg/L, the corrosion inhibition rate is 74.65%, the corrosion potential shifts by about 47.39 mV, the Rp value increases from 358.6 to 1102.4 Ω·cm2, and the Ydl value decreases from 177.31 Sn Ω-1cm-2 × 10-6 to 92.672 Sn Ω-1cm-2 × 10-6. CMCS and SH are adsorbed onto the surface of EH40 steel, forming a protective film through the complexation of carboxyl, amino, and other functional groups to inhibit corrosion and prevent the further formation of scale. In addition, synergistic coadsorption occurs between CMCS and SH, and the composite corrosion inhibitor exerts a better effect than the individual corrosion inhibitor.

Corrosion of EH40 steel affected by Halomonas titanicae dependent on electron acceptors utilized

Alternate immersion improves corrosion inhibition efficiency of Halomonas titanicae towards EH40 steel

The inhibition effects of Cu and Ni alloying elements on corrosion of HSLA steel influenced by Halomonas titanicae

Corrosion of EH40 steel enhanced by exogenous electron intermediaries in seawater containing Methanococcus maripaludis

Extracellular electron transfer corrosion mechanism of two marine structural steels caused by nitrate reducing Halomonas titanicae

The Impact of Oxygen Availability on Steel Corrosion Considering the Self-Balance Between Anodic and Cathodic Corrosion Cells

Influence of Carboxymethyl Chitosan and Sodium Humate Composite Corrosion Inhibitor on the Corrosion Resistance of EH40 Steel in Seawater

Effects of Pseudomonas aeruginosa on EH40 steel corrosion in the simulated tidal zone

Influence of soluble, loosely bound and tightly bound extracellular polymeric substances (EPS) produced by Desulfovibrio vulgaris on EH40 steel corrosion

Humic acid as eco‐friendly corrosion inhibitor for EH40 ship plate steel

The influence of iron-binding ligands in the corrosion of carbon steel driven by iron-reducing bacteria

Effect of Dissolved Oxygen Concentration on the Microbiologically Influenced Corrosion of Q235 Carbon Steel by Halophilic Archaeon Natronorubrum tibetense

Effect of SO42− in aerobic/anaerobic environment and its interaction with HCO3− on corrosion behavior of carbon steel

Effect of SO 4 2− in aerobic/anaerobic environment and its interaction with HCO 3 − on corrosion behavior of carbon steel

Effects of Environmental Factors on Corrosion Behavior of E690 Steel in Simulated Marine Environment

Insight into the galvanic corrosion behavior of the LHE Cd-Ti 300 M steel coupled with TC4 titanium alloy in different atmospheric environments

Effect of Ochrobactrum sp. on the Corrosion Behavior of 10MnNiCrCu Steel in Simulated Marine Environment

Corrosion evolution and stress corrosion cracking behavior of a low carbon bainite steel in the marine environments: Effect of the marine zones

Effects of alternating dissolved oxygen and dissolved hydrogen on the corrosion behavior of alloy 52 in high temperature high pressure water

Effect of Dissolved Hydrogen on Corrosion of 316NG Stainless Steel in High Temperature Water

Elucidating Microbial Iron Corrosion Mechanisms with a Hydrogenase-Deficient Strain of